3274102 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Number of levels
  1
• Rated surge voltage
  8 kV
• Maximum load current
  32 A
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Static insulating material application in cold
  -60 °C
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Stripping length
  8 mm ... 10 mm
• Conductor cross section AWG max.
  12
Max. AWG conductor cross section, flexible
14
Potentials
1
Degree of pollution
3
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Bending test turns
135
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
16 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color
blue
Insulating material
PA
Nominal voltage UN
690 V
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
28.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Number of connections
6
Insulating material group
I
Maximum total current
48 A
Nominal current IN
24 A
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141121
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 20.0
39121410
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
31.4 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 7.0
EC000897
ETIM 4.0
EC000897
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
UNSPSC 19.0
39121410