Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

RSS260-I1-D-ST Schmersal Safety Switches

Schmersal RSS260-I1-D-ST RSS260-I1-D-ST Schmersal - Safety sensors; Electronic safety sensors; Individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without additional angle;
Schmersal

Part#:RSS260-I1-D-ST

Manufacturer:Schmersal

Alt. Part#:103003606

Product Lifecycle:Active

Get a quick Quote!

RSS260-I1-D-ST Schmersal - Safety sensors; Electronic safety sensors; Individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without additional angle;

About the manufacturer: Schmersal is one of the manufacturers that offers Safety Switches that you can order at marketplace.quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the RSS260-I1-D-ST Schmersal price in the box on the right side or send a quick quote.

Product Details

  • Interfering radiation
    IEC 61000-6-4
  • EMC rating
    IEC 60947-3
  • Voltage, Utilisation category DC13
    24 VDC
  • Current, Utilisation category DC13
    0.05 A
  • Current, Utilisation category DC12
    0.05 A
  • Current leakage Ir
    0.5 mA
  • Voltage, Utilisation category DC12
    24 VDC
  • Voltage drop Ud, maximum
    2 V
  • Versions
    p-type
  • Required rated short-circuit current to EN 60947-5-1
    100 A
  • Switching frequency, approx.
    1 Hz
  • Operating current
    600 mA
  • Rated operating voltage, maximum
    26.4 VDC
  • Rated operating voltage, minimum
    20.4 VDC
  • Degree of pollution to VDE 0100
    3
  • Voltage type
    DC (direct current)
  • No-load supply current I0
    100 mA
  • Rated operating voltage
    24 VDC -15% / +10%
  • Overvoltage category
    III
  • Rated impulse withstand voltage Uimp
    0.8 kV
  • Rated insulation voltage Ui
    32 VDC
  • Restistance to shock
    30 g / 11 ms
  • Resistance to vibrations to EN 60068-2-6
    10 … 55 Hz, amplitude 1 mm
  • Degree of protection
    IP65 to EN 60529, IP67 to EN 60529
  • Height of sensor
    18 mm
  • Storage and transport temperature, maximum
    +85 °C
  • Ambient temperature, minimum
    -25 °C
  • Storage and transport temperature, minimum
    -25 °C
  • Ambient temperature, maximum
    +65 °C
  • Width of sensor
    39.2 mm
  • Length of sensor
    29.5 mm
  • Note
    The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
  • Ensured switch distance OFF Sar, lateral
    15 mm
  • Ensured switching distance ON, side
    6 mm
  • Ensured switching distance ON, front
    10 mm
  • Terminal Connector
    Connector M8
  • Ensured switching distance OFF, front
    18 mm
  • Switch distance Sn
    front 12 mm, lateral 9 mm
  • Mounting
    A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws.
  • Repeat accuracy R R
    0.5 mm
  • Note (Repeat accuracy R)
    Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
  • Number of fail-safe digital outputs
    2
  • Hysteresis (Switch distance), maximum
    2 mm
  • Actuating panels
    lateral, front side
  • Number of LEDs
    3
  • Number of semi-conductor outputs with signaling function
    1
  • Integral System Diagnostics, status
    Yes
  • Safety functions
    Yes
  • Diagnostic output
    Yes
  • Time to readiness, maximum
    2,000 ms
  • Reaction time, maximum
    100 ms
  • Short-circuit recognition
    Yes
  • Duration of risk, maximum
    200 ms
  • Short circuit detection
    Yes
  • Cascadable
    Yes
  • Gross weight
    60 g
  • Coding level according to ISO 14119
    High
  • Sensor topology
    Sensor for series wiring
  • Active principle
    RFID
  • Active area
    lateral, front
  • Installation conditions (mechanical)
    not flush
  • Enclosure material
    Plastic, thermoplastic, self-extinguishing
  • Standards
    IEC 60947-5-3
  • general information
    Individual coding
  • Housing construction form
    Block

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


RSS260-I1-D-ST Description

RSS260-I1-D-ST Schmersal - Safety sensors; Electronic safety sensors; Individual coding with RFID technology; Coding level "High" according to ISO 14119; 1 x connector plug M8; Frontal and lateral actuation enabled; Thermoplastic enclosure; Simple mounting without additional angle;



Related documents RSS260-I1-D-ST Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Schmersal

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Schmersal Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schmersal Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schmersal, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo