Name: LT4706F7S
Brand: Schneider Electric

LT4760M7S

Schneider Electric LT4760M7S, part of the LT47 sub-range, is a 3-pole electronic overcurrent relay designed for use with 2 measurement current transformers in a control circuit featuring screw-clamp connections. It offers protection functions including electronic overcurrent relay, locked rotor mechanical jamming, overload with Imax greater than Isetting, and sensitivity to phase failure. The rated current range is 5-60 A, with control voltage specifications of 200-240 Vdc for DC and 200-240 Vac (50/60Hz) for AC. Protection settings include thermal overload adjustments from 5-60A, a D-time knob ranging from 0.5-30s, and an O-time knob from 0.3-10s. It also features 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The supply voltage is rated at 200-240 V for both AC and DC, with a rated voltage (AC) phase-to-phase of 690 V (50-60Hz). The minimum and maximum currents are set at 5 A and 60 A, respectively.

Schneider Electric

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

MH30703P07F2200

Verified stock: 0

Schneider Electric MH30703P07F2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. This motor features an absolute multi-turn 16ppr SinCos encoder, a smooth shaft with a holding brake, and triple (3) motor stacks designed for optimized torque and speed of rotation, catering to medium-inertia applications. It comes with a rotatable right-angled connector for flexible installation and supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Part of the Servo motors sub-range, it boasts an IP65 degree of protection, utilizes the HIPERFACE communication protocol, and achieves a rotational speed of 5000rpm. The motor has a stall torque of 3.4Nm, a rated active power of 1.3kW (1300W) or 1.8HP, a moment of inertia of 4kg.cm^2, a nominal torque of 2.3Nm, and can reach a maximum torque of 10.2Nm.

Schneider Electric

LC1D806BD

Verified stock: 0

Schneider Electric LC1D806BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for a current of 125A (AC-1) and 80A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 20.4-26.4Vdc (24Vdc nom.; 0.85...1.1 x Uc). The rated operating voltage (Ue) is 1000 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac 3-phase. The mechanical durability of the LC1D806BD is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage (AC) phase-to-phase is 1000 V.

Schneider Electric

LT4706BS

Verified stock: 0

Schneider Electric LT4706BS, part of the LT47 sub-range, features a connection type of 2 measurement current transformers with screw-clamp terminals and is designed with 3 poles. It includes protection functions such as an electronic overcurrent relay, locked rotor mechanical jamming, overload protection with Imax greater than Isetting, and sensitivity to phase failure. The rated current for this device ranges from 0.5-6 A, and it operates with a control voltage of 24 Vdc. Protection settings include thermal overload adjustments from 0.5-6A, with a D-time knob ranging from 0.5-30s and an O-time knob from 0.3-10s. It also supports a control voltage (AC) of 24 Vac at 50/60Hz, includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, and requires a supply voltage of 24 V AC/DC. The rated voltage (AC) phase-to-phase is up to 690 V at 50-60Hz, with a minimum current of 0.5 A and a maximum current of 6 A.

Schneider Electric

LT4706M7S

Verified stock: 0

Schneider Electric LT4706M7S, part of the LT47 sub-range, is designed with a connection type of 2 measurement current transformers using a screw-clamp and features 3 poles. It includes protection functions such as an electronic overcurrent relay, locked rotor mechanical jamming, overload with Imax greater than Isetting, and sensitivity to phase failure. The rated current for this part ranges from 0.5-6 A, with control voltage specifications of 200-240 Vdc for DC and 200-240 Vac for AC at 50/60Hz. Protection settings are detailed with thermal overload adjustments from 0.5-6A, a D-time knob ranging from 0.5-30s, and an O-time knob from 0.3-10s. It also includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact. The supply voltage is rated at 200-240 V for both AC and DC, with a rated voltage (AC) phase-to-phase of 690 V at 50-60Hz. The minimum and maximum currents are specified as 0.5 A and 6 A, respectively.

Schneider Electric

LT4730F7S

Verified stock: 0

Schneider Electric LT4730F7S, part of the LT47 sub-range, features a 3 Pole configuration with connection via 2 measurement current transformers using a screw-clamp method. It is designed with electronic overcurrent relay protection functions including locked rotor mechanical jamming, overload with Imax greater than Isetting, and sensitivity to phase failure. The rated current for this part spans from 3 to 30 A, supported by a control voltage range of 100-120 Vdc and an AC control voltage of 100-120 Vac at 50/60Hz. Protection settings are adjustable with thermal overload settings from 3-30A, a D-time knob ranging from 0.5-30s, and an O-time knob from 0.3-10s. It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The supply voltage can be either AC or DC within the 100-120 V range, and it can handle a rated voltage (AC) phase-to-phase of up to 690 V at 50-60Hz, with a minimum current threshold of 3 A and a maximum of 30 A.

Schneider Electric

LT4730BS

Verified stock: 0

Schneider Electric LT4730BS, part of the LT47 sub-range, is equipped with a connection type of 2 measurement current transformers (control circuit) with screw-clamp terminals and features 3 poles. It offers protection functions including an electronic overcurrent relay, locked rotor mechanical jamming, overload with Imax > Isetting, and sensitivity to phase failure. The rated current for this device ranges from 3-30 A, and it operates with a control voltage of 24 Vdc. Protection settings include thermal overload adjustments from 3-30A, with a D-time knob ranging from 0.5-30s and an O-time knob from 0.3-10s. It also supports a control voltage (AC) of 24 Vac at 50/60Hz, includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, and requires a supply voltage of 24 V (AC/DC). The rated voltage (AC) phase-to-phase is 690 V at 50-60Hz, with a minimum current of 3 A and a maximum current of 30 A.

Schneider Electric

LT4760M7S

Verified stock: 0

Schneider Electric LT4760M7S, part of the LT47 sub-range, is a 3-pole electronic overcurrent relay designed for use with 2 measurement current transformers in a control circuit featuring screw-clamp connections. It offers protection functions including electronic overcurrent relay, locked rotor mechanical jamming, overload with Imax greater than Isetting, and sensitivity to phase failure. The rated current range is 5-60 A, with control voltage specifications of 200-240 Vdc for DC and 200-240 Vac (50/60Hz) for AC. Protection settings include thermal overload adjustments from 5-60A, a D-time knob ranging from 0.5-30s, and an O-time knob from 0.3-10s. It also features 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The supply voltage is rated at 200-240 V for both AC and DC, with a rated voltage (AC) phase-to-phase of 690 V (50-60Hz). The minimum and maximum currents are set at 5 A and 60 A, respectively.

Schneider Electric

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

MH30703P07F2200

Verified stock: 0

Schneider Electric MH30703P07F2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. This motor features an absolute multi-turn 16ppr SinCos encoder, a smooth shaft with a holding brake, and triple (3) motor stacks designed for optimized torque and speed of rotation, catering to medium-inertia applications. It comes with a rotatable right-angled connector for flexible installation and supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Part of the Servo motors sub-range, it boasts an IP65 degree of protection, utilizes the HIPERFACE communication protocol, and achieves a rotational speed of 5000rpm. The motor has a stall torque of 3.4Nm, a rated active power of 1.3kW (1300W) or 1.8HP, a moment of inertia of 4kg.cm^2, a nominal torque of 2.3Nm, and can reach a maximum torque of 10.2Nm.

Schneider Electric

LC1D806BD

Verified stock: 0

Schneider Electric LC1D806BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for a current of 125A (AC-1) and 80A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 20.4-26.4Vdc (24Vdc nom.; 0.85...1.1 x Uc). The rated operating voltage (Ue) is 1000 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac 3-phase. The mechanical durability of the LC1D806BD is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage (AC) phase-to-phase is 1000 V.

Schneider Electric

LT4706BS

Verified stock: 0

Schneider Electric LT4706BS, part of the LT47 sub-range, features a connection type of 2 measurement current transformers with screw-clamp terminals and is designed with 3 poles. It includes protection functions such as an electronic overcurrent relay, locked rotor mechanical jamming, overload protection with Imax greater than Isetting, and sensitivity to phase failure. The rated current for this device ranges from 0.5-6 A, and it operates with a control voltage of 24 Vdc. Protection settings include thermal overload adjustments from 0.5-6A, with a D-time knob ranging from 0.5-30s and an O-time knob from 0.3-10s. It also supports a control voltage (AC) of 24 Vac at 50/60Hz, includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, and requires a supply voltage of 24 V AC/DC. The rated voltage (AC) phase-to-phase is up to 690 V at 50-60Hz, with a minimum current of 0.5 A and a maximum current of 6 A.

Schneider Electric

LT4706M7S

Verified stock: 0

Schneider Electric LT4706M7S, part of the LT47 sub-range, is designed with a connection type of 2 measurement current transformers using a screw-clamp and features 3 poles. It includes protection functions such as an electronic overcurrent relay, locked rotor mechanical jamming, overload with Imax greater than Isetting, and sensitivity to phase failure. The rated current for this part ranges from 0.5-6 A, with control voltage specifications of 200-240 Vdc for DC and 200-240 Vac for AC at 50/60Hz. Protection settings are detailed with thermal overload adjustments from 0.5-6A, a D-time knob ranging from 0.5-30s, and an O-time knob from 0.3-10s. It also includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact. The supply voltage is rated at 200-240 V for both AC and DC, with a rated voltage (AC) phase-to-phase of 690 V at 50-60Hz. The minimum and maximum currents are specified as 0.5 A and 6 A, respectively.

Schneider Electric

LT4730F7S

Verified stock: 0

Schneider Electric LT4730F7S, part of the LT47 sub-range, features a 3 Pole configuration with connection via 2 measurement current transformers using a screw-clamp method. It is designed with electronic overcurrent relay protection functions including locked rotor mechanical jamming, overload with Imax greater than Isetting, and sensitivity to phase failure. The rated current for this part spans from 3 to 30 A, supported by a control voltage range of 100-120 Vdc and an AC control voltage of 100-120 Vac at 50/60Hz. Protection settings are adjustable with thermal overload settings from 3-30A, a D-time knob ranging from 0.5-30s, and an O-time knob from 0.3-10s. It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The supply voltage can be either AC or DC within the 100-120 V range, and it can handle a rated voltage (AC) phase-to-phase of up to 690 V at 50-60Hz, with a minimum current threshold of 3 A and a maximum of 30 A.

Schneider Electric

LT4730BS

Verified stock: 0

Schneider Electric LT4730BS, part of the LT47 sub-range, is equipped with a connection type of 2 measurement current transformers (control circuit) with screw-clamp terminals and features 3 poles. It offers protection functions including an electronic overcurrent relay, locked rotor mechanical jamming, overload with Imax > Isetting, and sensitivity to phase failure. The rated current for this device ranges from 3-30 A, and it operates with a control voltage of 24 Vdc. Protection settings include thermal overload adjustments from 3-30A, with a D-time knob ranging from 0.5-30s and an O-time knob from 0.3-10s. It also supports a control voltage (AC) of 24 Vac at 50/60Hz, includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, and requires a supply voltage of 24 V (AC/DC). The rated voltage (AC) phase-to-phase is 690 V at 50-60Hz, with a minimum current of 3 A and a maximum current of 30 A.

Schneider Electric

LT4760M7S

Verified stock: 0

Schneider Electric LT4760M7S, part of the LT47 sub-range, is a 3-pole electronic overcurrent relay designed for use with 2 measurement current transformers in a control circuit featuring screw-clamp connections. It offers protection functions including electronic overcurrent relay, locked rotor mechanical jamming, overload with Imax greater than Isetting, and sensitivity to phase failure. The rated current range is 5-60 A, with control voltage specifications of 200-240 Vdc for DC and 200-240 Vac (50/60Hz) for AC. Protection settings include thermal overload adjustments from 5-60A, a D-time knob ranging from 0.5-30s, and an O-time knob from 0.3-10s. It also features 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The supply voltage is rated at 200-240 V for both AC and DC, with a rated voltage (AC) phase-to-phase of 690 V (50-60Hz). The minimum and maximum currents are set at 5 A and 60 A, respectively.

Schneider Electric

MH31002P12F2200

Verified stock: 0

Schneider Electric MH31002P12F2200 is an AC servo motor characterized by a 100x100mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. It features an absolute multi-turn 128ppr SinCos encoder, a parallel key shaft with a holding brake, and double motor stacks designed for optimized torque and speed of rotation with medium inertia. The connection is facilitated by a rotatable right-angled connector, and it supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. This servo motor, part of the Servo motors sub-range, offers a degree of protection rated at IP65 and utilizes the HIPERFACE communication protocol. It achieves a rotational speed of 4000rpm, a stall torque of 6Nm, and is rated at 1.2kW or 1200W of active power, equivalent to 2.7HP. The moment of inertia is specified as 6.4kg.cm2, with a nominal torque of 4.2Nm and a maximum torque capacity of 18Nm.

Schneider Electric

MH30703P07F2200

Verified stock: 0

Schneider Electric MH30703P07F2200 is an AC servo motor characterized by its 70x70mm flange mounting mode and operates within an ambient air temperature range of -20 to +40°C. This motor features an absolute multi-turn 16ppr SinCos encoder, a smooth shaft with a holding brake, and triple (3) motor stacks designed for optimized torque and speed of rotation, catering to medium-inertia applications. It comes with a rotatable right-angled connector for flexible installation and supports a wide supply voltage range from 115Vac to 480Vac, including specific voltages such as 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, 240Vac, 380Vac, 400Vac, 415Vac, and 440Vac. Part of the Servo motors sub-range, it boasts an IP65 degree of protection, utilizes the HIPERFACE communication protocol, and achieves a rotational speed of 5000rpm. The motor has a stall torque of 3.4Nm, a rated active power of 1.3kW (1300W) or 1.8HP, a moment of inertia of 4kg.cm^2, a nominal torque of 2.3Nm, and can reach a maximum torque of 10.2Nm.

Schneider Electric

LC1D806BD

Verified stock: 0

Schneider Electric LC1D806BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for a current of 125A (AC-1) and 80A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 20.4-26.4Vdc (24Vdc nom.; 0.85...1.1 x Uc). The rated operating voltage (Ue) is 1000 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac 3-phase. The mechanical durability of the LC1D806BD is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage (AC) phase-to-phase is 1000 V.

Schneider Electric

LT4706F7S Schneider Electric Thermal Overload Relays

Part#:LT4706F7S

Manufacturer:Schneider Electric

Product condition

LT4706F7S Description

Schneider Electric Disclaimer:

Relevant products

LT4760M7S

MH31002P12F2200

MH30703P07F2200

LC1D806BD

LT4706BS

LT4706M7S

LT4730F7S

LT4730BS

LT4760M7S

MH31002P12F2200

MH30703P07F2200

LC1D806BD

LT4706BS

LT4706M7S

LT4730F7S

LT4730BS

LT4760M7S

MH31002P12F2200

MH30703P07F2200

LC1D806BD

We are a proud member of: