235-726 WAGO Industrial Automation Components

WAGO 235-726 is a printed circuit connector with a short circuit breaking rating as per IEC/EN 60664-1. It features nominal voltages of 400V (III/3), 630V (III/2), and 1000V (II/2), with a rated impulse voltage of 6kV for all categories and a rated current of 10A. This part is designed for overvoltage category III / Pollution degree 2. It has UL 1059 approval with rated voltages of 300V and rated currents of 10A for both Use Group B and D, alongside CSA approval for the same rated voltages and currents in Use Group B. The connector offers 2 connection points, 1 potential, and 1 connection type across 1 level, utilizing PUSH WIRE technology for solid conductors ranging from 0.25 to 0.75mm2 / 24 to 18 AWG and fine-stranded conductors with uninsulated ferrule from 0.25 to 0.34mm2. The strip length is 9 to 10mm / 0.35 to 0.39", with a conductor connection direction to PCB at 0° and a pole number of 1. Physical specifications include a pin spacing of 7.5/7.62mm / 0.295/0.3", width of 9mm / 0.354", height of 12.8mm / 0.504", height from the surface of 9.2mm / 0.362", depth of 12.5mm / 0.492", solder pin length of 3.6mm, and solder pin dimensions of 0.8 x 0.4mm. The drilled hole diameter with tolerance is 1 (+0.1)mm. It features a THT PCB contact with in-line solder pin arrangement and two solder pins per potential. The connector is orange, made from Polyamide (PA66) with a flammability class of V0, and uses Chrome-Nickel spring steel (CrNi) for the clamping spring and Electrolytic Copper (ECu) with tin plating for contacts. It has a fire load of 0.01MJ and weighs 0.6g. The operating temperature range is -60 to +105°C. Packaged in boxes of 600 pieces, it is RoHS compliant with no exemptions, has a GTIN of 4044918832090, and a customs tariff number of 85369010000. The country of origin is CH.