Control Relays

2910522

PLC-INTERFACE, consisting of a relay base and pluggable power contact relay with manual operation, integrated status LED, Push-in connection, 2 changeover contacts, Input voltage: 120 V AC / 110 V DC14 mm PLC basic terminal block without relay, for mounti

Phoenix Contact

2833628

Relay retaining bracket, wiring to suit relay base RIF-3 and PR3, for 52 mm high octal relay

Phoenix Contact

2909845

Pre-assembled relay module consisting of: relay base, function plug-in module, power contact relay, and retaining bracket, approval in accordance with ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2, Screw connection, 4 changeover contacts, Input voltage:

Phoenix Contact

2987985

Plug-in miniature relay, with multi-layer contact with hard gold coating, 2 changeover contacts, test button, mechanical switching position indicator, status LED, freewheeling diode, polarity A1+, A2-, input voltage 24 V DC

Phoenix Contact

2961370

Plug-in miniature power relay, with multi-layer gold contact, 1 changeover contact, input voltage 4.5 V DC

Phoenix Contact

2952910

Relay module, with soldered-in remanence miniature switching relay, with negative switching diode wiring, contacts (AgSnO): small to large loads, 1 changeover contact, input voltage 24 V DC

Phoenix Contact

2903374

Pre-assembled relay module with screw connection, consisting of: relay base with ejector and power contact relay. Contact type: 1 changeover contact. Input voltage: 24 V DCPlug-in miniature power relay, with power contact, 1 changeover contact, input volt

Phoenix Contact

2942111

Relay module, with soldered-in miniature switching relay, contact (AgNi): Medium to large loads, 1 N/C contact, input voltage 24 V DC

Phoenix Contact

93.02.7.024

Finder 93.02.7.024 is a socket designed for box-clamp connections, featuring a rated current of 10A and a degree of protection marked as IP20. It operates with a control voltage of 24Vdc and is suitable for DIN rail mounting. The part adheres to the EN61984 standard, indicating its compliance with specific electrical requirements. The power consumption indicator is color-coded blue, facilitating easy identification in complex setups.

Finder

2980416

6.2 mm PLC basic terminal block with protection against interference currents/voltages on the control side, with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with integrated RCZ filter, 2 changeover contacts, i

Phoenix Contact

60.12.8.012.0040

Finder 60.12.8.012.0040 is a relay with solder pin connection type, designed for a rated current of 10A at 250Vac (AC-1) and 10A at 30Vdc (DC-1), with lower current ratings of 0.4A at 110Vdc and 0.15A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is capable of handling ambient air temperatures from -40 to +70 degrees Celsius for operation and storage. This relay features a rated voltage of 250Vac, a control voltage of 4 kV, and is designed for plug-in mounting with 8-pins. It has a net depth of 66.7 mm, a mounting mode width of 32.5 mm, and a power consumption width of 36.4 mm. The relay is equipped with Normally Closed (NC) auxiliary contacts rated at 1.3 W, supports a mechanical resistance of up to 200,000 operations, and is constructed with AgNi (Silver Nickel) contacts. Its color is specified for a 12Vac (50Hz/60Hz) operation.

Finder

2948885

Input solid-state relay, with LED and protective circuit in input and output circuits, input: 5 V DC, output: 4 - 48 V DC/max. 100 mA

Phoenix Contact

38.52.0.125.0060

Finder 38.52.0.125.0060 is a relay designed for various applications, featuring a box-clamp connection type. It supports a rated current of 8A for both 250Vac (AC-1) and 30Vdc (DC-1), with lower currents of 0.3A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts. The supply voltage is specified as 2C/O / DPDT (Double Pole Double Throw), with an ambient air temperature for operation at 400VA (230Vac) and for storage at 2000VA (250Vac). The rated voltage for AC operation is not specified, but the ambient air temperature range is from -40 to +70 degrees Celsius. It uses a communication protocol labeled as C, has a net width of IP20, and is designed for 125Vdc poles with protection functions at 250Vac. The control voltage (AC) is rated at 4 kV, with a mounting mode of 14 mm and rated active power for 2 poles. The color is specified for 125Vac (50Hz/60Hz) operations. It offers a residual current sensitivity with DIN rail and plug-in mounting options. The analog inputs conform to EN61984 standards, and the contact material is AgNi (Silver Nickel), ensuring compatibility and durability for its intended applications.

Finder

2903316

Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 230 V ACRIF-2... relay base, for

Phoenix Contact

2966809

PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-in miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 230 V AC/220 V DC, output: 3 - 48 V DC/100 mA

Phoenix Contact

2966223

PLC-INTERFACE for input functions, consisting of PLC-BSC.../SEN basic terminal block with screw connection and plug-in miniature relay with power contact, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input voltage 24 V DC

Phoenix Contact

2900940

Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with freewheeling diode and yellow LED, polarity: A1+, A2-, input voltage: 48 ... 60 V DC ±20 %

Phoenix Contact

38.21.0.024.0060

Finder 38.21.0.024.0060 is a relay with a box-clamp connection type, designed for a rated current of 6A at 250Vac (AC-1) and 6A at 30Vdc (DC-1), with lower current ratings of 0.2A at 110Vdc and 0.12A at 220Vdc for Normally Open (NO) auxiliary contacts in DC-1 design. It operates with a supply voltage of 1C/O / SPDT (Single Pole Double Throw), supporting an ambient air temperature for operation with a capacity of 1500VA at 250Vac (AC-1) and an ambient air temperature for storage ranging from -40 to +70 degrees Celsius. The rated voltage for AC operations is categorized under type C, with a rated impulse voltage (Uimp) of 4 kV. This relay features a net width of 24Vdc, poles rated at 250Vac, and a net depth indicating a control voltage of 6.2 mm for AC. It is designed for mounting on a DIN rail or through plug-in, with a single pole configuration and a power consumption specified for 24Vac (50Hz/60Hz). The color is standardized for this type of component, and it is protected according to EN61984 standards. The mechanical durability is enhanced by AgNi (Silver Nickel) contacts, ensuring compatibility with a wide range of automation applications.

Finder

2941183

Relay terminal block, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage 5 V AC/DC, for assembly on NS 35/7.5, terminal width 6.2 mm

Phoenix Contact

2987309

PLC-INTERFACE with two independent relays, consisting of PLC-BSC.../21 basic terminal block with screw connection and two integrated relays, power contact, for mounting on DIN rail NS 35/7,5, 2 x 1 N/O contact, input voltage 24 V DC

Phoenix Contact