Pressure Sensors

DPSP1B-10020

AirTAC DPSP1B-10020 - Digital display pressure switch(N1-10/Grommet/2M), DPS Series, 1000Kpa PT

AirTAC

PE-1/8-1N

Festo PE-1/8-1N is a sensor designed for converting pneumatic signals into electrical (PE) signals, suitable for ambient air temperatures ranging from 0 to +60°C. It features a splash-proof design and accepts compressed air in the range of 0°C to +60°C as per ISO 8573-1/2010 [7;4;4] standards. This part is equipped with a pre-wired 3-core 0.5m cable with bare end flying leads and a G1/8" threaded pneumatic connection. Classified under the accessories sub-range, it offers an IP67 degree of protection. The housing is made from die-cast aluminium, and it includes galvanized electrical contacts. It operates within a pressure range of 0 to +8bar and has one digital output (contact-based).

Festo

UZU2212

NAIS Matsushita UZU2212 Pressure Sensor 0 to 100 kPa

NAIS Matsushita

DPSN1-10020

AirTAC DPSN1-10020 - Digital display pressure switch(N1-10/Terminal/2M), DPS Series, 1000kPa PT

AirTAC

8001448

pressure sensor SPAE-P10R-Q4-PNLK-2.5K Authorisation: (* RCM Mark, * c UL us - Recognized (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Materials note: Conforms to RoH

Festo

DPSP1B-10020T

AirTAC DPSP1B-10020T - Digital display pressure switch(N1-10/Grommet/2M), DPS Series, 1000kPa NPT

AirTAC

DPSN1-01020T

AirTAC DPSN1-01020T - Digital display pressure switch(N1-01/Terminal/2M), DPS Series, 100kPa NPT

AirTAC

PT1VR-1013-IOL-H1141

PT1VR-1013-IOL-H1141 Turck - PT1VR-1013-IOL-H1141 Pressure Transmitter, With 2 Switching Outputs and IO-Link

Turck

SDE1-D10-G2-MS-L-PI-M12

Festo SDE1-D10-G2-MS-L-PI-M12 is a piezoresistive pressure sensor/switch designed for direct connection to MS series service unit with an M12 female connector. It features a PA / reinforced POM housing and operates on a supply voltage of 15-30Vdc, with 24Vdc nominal. This sensor is intended for mounting on a service unit and can operate in ambient air temperatures ranging from 0°C to +50°C. It offers a degree of protection of IP65 and has a chemical resistance classified as CRC Class 2, indicating moderate-corrosion stress resistance. The sensor measures pressure from 0 to +10bar and includes 1 x digital output (switchable PNP; 150mA) with a measurement accuracy of 2% F.S.

Festo

8035303

pressure sensor SPAU-P10R-MS6-F-L-PNLK-PNVBA-M8D Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Materials note: Conforms

Festo

527463

pressure sensor SDE5-D10-O-Q4-P-M8 With M8 plug version. Authorisation: (* RCM Mark, * c UL us - Recognized (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Materials not

Festo

PS325-001D-02-2UPN8-H1141

Pressure Sensor, Differential Pressure: 0…1 bar, Operating voltage 18…33 VDC, 4-digit, 2-colored, 12-segment display, rotatable by 180°, Housing is rotatable after plugging the process connection, Pressure range 0…1 bar diff., 18…33 V DC, NO/NC contact, PNP/NPN output, IO-Link, T-type, Process connection 1/4 inch NPT-18 female thread, Connector device, M12 × 1

Turck

PS0.25V-501-2UPN8X-H1141

PS0.25V-501-2UPN8X-H1141 Turck - PS0.25V-501-2UPN8X-H1141 Pressure Transmitter (Rotatable), 2 PNP/NPN Transistor Switching Outputs

Turck

527467

pressure sensor SDE5-D10-O-Q6E-P-M8 With M8 plug version. Authorisation: (* RCM Mark, * c UL us - Recognized (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Materials no

Festo

8035302

pressure sensor SPAU-P10R-MS4-F-L-PNLK-PNVBA-M8D Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Materials note: Conforms

Festo

QM42-DPS20-2Q

Differential Pressure +/- 20 in W.C.; Modbus RS-485 Serial Interface; 2.09 m (6.9 ft) 5-pin M12 Pigtail QD

Banner

8001215

pressure sensor SPAU-P10R-H-T532D-L-PNLK-PNVBA-M8D Suitable for monitoring compressed air and non-corrosive gases, mounting H-rail, with display. Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU direc

Festo

DPSP1D-01050T

AirTAC DPSP1D-01050T - Digital display pressure switch P1 5M Bottom plug-in connector, DPS Series, 100kPa NPT

AirTAC

XMLR010G1N25

Telemecanique Sensors XMLR010G1N25 is a compact pressure sensor/transmitter within the XMLR sub-range. It features an M12 connector and a G 1/4 DIN 3852-Y (female) fluid connection. This sensor offers a degree of protection rated at IP65 and IP67, ensuring its suitability for various environments. It is designed to withstand up to 10,000,000 operations at no load. The XMLR010G1N25 provides one analog output (4-20mA) and a digital output via an NPN transistor. It operates with a supply voltage of 24 V DC and has a current consumption of 50 mA (0.05 A). This sensor can measure pressure ranges from 0 to 1000 kPa (0 to 10 bar or 0 to 145 psi) and operates within a temperature range of -20°C to 80°C.

Telemecanique Sensors

XMLR400M1P25

Telemecanique Sensors XMLR400M1P25 is a compact pressure sensor/transmitter within the XMLR sub-range. It features an M12 connector and a G 1/4 DIN 3852-Y (female) fluid connection. This sensor offers a degree of protection rated at IP65 and IP67, ensuring its suitability for various environments. It is designed to withstand up to 10,000,000 operations at no load, highlighting its mechanical durability. The XMLR400M1P25 provides one analog output (4-20mA) and a PNP transistor output for digital signaling. It operates with a supply voltage of 24 V DC and has a current consumption of 50 mA (0.05 A). This sensor can measure pressure ranges from 0 to 40,000 kPa (0-400 bar or 0-5800 psi) and operates within a temperature range of -20°C to 80°C.

Telemecanique Sensors