8083383 Festo Electric Actuators

Product Details

• Display
  LED
• Ready status indication
  LED
• Power supply, connection pattern
  00995989
• Guide value for payload, vertical
  13 kg
• Work range of logic input
  24 V
• Rotor position sensor resolution
  16 bit
• Power supply, type of connection
  Plug
• Power supply, number of pins/wires
  4
• Guide value for payload, horizontal
  20 kg
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Size
  60
• Screw diameter
  12 mm
• Mounting position
  Any
• Max. speed
  0.25 m/s
• Degree of protection
  IP40
• Number of digital logic inputs
  2
• Logic interface, number of poles/wires
  8
• Storage temperature
  -20 °C ... 60 °C
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
Protection class
III
Stroke reserve
0 mm
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Max. acceleration
5 m/s²
Certification
RCM compliance mark
2nd moment of area Iy
441000 mm⁴
Fy with theoretical service life of 100 km (from a guide perspective only)
2208 N
My with theoretical service life of 100 km (from a guide perspective only)
117 Nm
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Guide
Recirculating ball bearing guide
Spindle type
Ball screw drive
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Duty cycle
100%
Max. force Fz
1800 N
Motor type
Stepper motor
Additional functions
User interface Integrated end-position sensing
Torsion moment of inertia It
29800 mm⁴
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Cover strip material
High-alloy stainless steel
Guide rail material
Steel
Symbol
00997292
Repetition accuracy
±0.01 mm
Ambient temperature
0 °C ... 50 °C
Max. force Fy
600 N
Max. torque My
31.8 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Feed constant
12 mm/U
Profile material
Wrought aluminum alloy, anodized
Slide material
Die-cast aluminum
2nd moment of area Iz
542000 mm⁴
Fz with theoretical service life of 100 km (from a guide perspective only)
6624 N
Max. torque Mz
31.8 Nm
Max. torque Mx
29.1 Nm
Max. feed force Fx
200 N
Product weight
3372 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Drive cover material
Die cast aluminum, painted
Mx with theoretical service life of 100 km (from a guide perspective only)
107 Nm
Moving mass
525 g
Material of end caps
Die cast aluminum, painted
Static deflection (load at standstill)
0.1 % of axis length
Spindle material
Steel
Slide carriage material
Steel
Spindle nut material
Steel
Insulation protection class
B
Permissible voltage fluctuations
+/- 15 %
KC characters
KC EMC
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Relative air humidity
0 - 90 %
Input switching logic
PNP (positive switching)
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic input specification
Based on IEC 61131-2, type 1
Rotor position sensor
Absolute encoder, single-turn
Rotor position sensor measuring principle
Magnetic
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Number of digital logic outputs 24 V DC
2
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, process data width IN
2 Byte
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
IO-Link®, Connection technology
Plug
Type code
ELGS
Position sensing
Motor encoder For proximity sensor
Switching logic at outputs
PNP (positive switching)
Logic interface, connection type
Plug
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Nominal current
5.3 A
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
Working stroke
100 mm
Spindle pitch
12 mm/U

Related documents 8083383 Specs