8083384 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Insulation protection class
  B
• Relative air humidity
  0 - 90 %
• Rotor position sensor measuring principle
  Magnetic
• Switching logic at outputs
  PNP (positive switching)
• Logic input specification
  Based on IEC 61131-2, type 1
• Permissible voltage fluctuations
  +/- 15 %
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Position sensing
  Motor encoder For proximity sensor
• Rotor position sensor
  Absolute encoder, single-turn
• Parameterization interface
  IO-Link® User interface
• Homing
  Fixed stop block positive Fixed stop block, negative
• Display
  LED
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Input switching logic
  PNP (positive switching)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, type of connection
  Plug
• Power supply, number of pins/wires
  4
Logic interface, number of poles/wires
8
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Ready status indication
LED
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Guide value for payload, horizontal
20 kg
Rotor position sensor resolution
16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Guide value for payload, vertical
13 kg
DC nominal voltage
24 V
IO-Link®, process data width IN
2 Byte
Working stroke
200 mm
Mounting position
Any
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Max. speed
0.25 m/s
Max. feed force Fx
200 N
Power supply, connection pattern
00995989
Number of digital logic inputs
2
Number of digital logic outputs 24 V DC
2
Logic interface, connection type
Plug
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
Max. current consumption
5300 mA
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
IO-Link®, data memory required
500 byte
Spindle pitch
12 mm/U
Guide
Recirculating ball bearing guide
Spindle type
Ball screw drive
Repetition accuracy
±0.01 mm
Certification
RCM compliance mark
Max. force Fz
1800 N
Max. torque Mz
31.8 Nm
Product weight
3882 g
Material of end caps
Die cast aluminum, painted
Spindle material
Steel
Storage temperature
-20 °C ... 60 °C
IO-Link®, minimum cycle time
1 ms
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
Screw diameter
12 mm
Type code
ELGS
Motor type
Stepper motor
Max. acceleration
5 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Nominal current
5.3 A
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, Connection technology
Plug
Stroke reserve
0 mm
Design
Electromechanical linear axis With integrated drive
Additional functions
User interface Integrated end-position sensing
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iy
441000 mm⁴
Mx with theoretical service life of 100 km (from a guide perspective only)
107 Nm
Torsion moment of inertia It
29800 mm⁴
Static deflection (load at standstill)
0.1 % of axis length
Drive cover material
Die cast aluminum, painted
IO-Link®, protocol version
Device V 1.1
IO-Link®, number of ports
1
IO-Link®, port class
A
Size
60
Symbol
00997292
Duty cycle
100%
Degree of protection
IP40
Max. force Fy
600 N
Max. torque Mx
29.1 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Moving mass
525 g
Cover strip material
High-alloy stainless steel
Guide rail material
Steel
2nd moment of area Iz
542000 mm⁴
Fz with theoretical service life of 100 km (from a guide perspective only)
6624 N
Max. torque My
31.8 Nm
Feed constant
12 mm/U
Profile material
Wrought aluminum alloy, anodized
Slide carriage material
Steel
Spindle nut material
Steel
Fy with theoretical service life of 100 km (from a guide perspective only)
2208 N
My with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide material
Die-cast aluminum

Related documents 8083384 Specs