8083385 Festo Electric Actuators

Product Details

• Insulation protection class
  B
• Input switching logic
  PNP (positive switching)
• Display
  LED
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Guide value for payload, vertical
  13 kg
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, data memory required
  500 byte
• Spindle pitch
  12 mm/U
• Symbol
  00997292
• Max. speed
  0.25 m/s
• 2nd moment of area Iz
  542000 mm⁴
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Permissible voltage fluctuations
  +/- 15 %
• Position sensing
  Motor encoder For proximity sensor
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Rotor position sensor
  Absolute encoder, single-turn
Rotor position sensor measuring principle
Magnetic
Switching logic at outputs
PNP (positive switching)
Characteristics of logic input
Configurable Not galvanically isolated
Parameterization interface
IO-Link® User interface
Homing
Fixed stop block positive Fixed stop block, negative
KC characters
KC EMC
Logic input specification
Based on IEC 61131-2, type 1
Relative air humidity
0 - 90 %
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic inputs
2
Logic interface, number of poles/wires
8
Storage temperature
-20 °C ... 60 °C
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
IO-Link®, Connection technology
Plug
Screw diameter
12 mm
Design
Electromechanical linear axis With integrated drive
Logic interface, connection type
Plug
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Power supply, number of pins/wires
4
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, minimum cycle time
1 ms
IO-Link®, number of ports
1
Stroke reserve
0 mm
Mounting position
Any
Motor type
Stepper motor
Repetition accuracy
±0.01 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
My with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Torsion moment of inertia It
29800 mm⁴
Moving mass
525 g
Drive cover material
Die cast aluminum, painted
Power supply, connection pattern
00995989
Number of digital logic outputs 24 V DC
2
Guide value for payload, horizontal
20 kg
Nominal current
5.3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
Working stroke
300 mm
Spindle type
Ball screw drive
Additional functions
User interface Integrated end-position sensing
Duty cycle
100%
Fz with theoretical service life of 100 km (from a guide perspective only)
6624 N
Max. torque My
31.8 Nm
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Protection class
III
Size
60
Type code
ELGS
Guide
Recirculating ball bearing guide
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Degree of protection
IP40
2nd moment of area Iy
441000 mm⁴
Max. force Fz
1800 N
Mx with theoretical service life of 100 km (from a guide perspective only)
107 Nm
Feed constant
12 mm/U
Cover strip material
High-alloy stainless steel
Max. acceleration
5 m/s²
Ambient temperature
0 °C ... 50 °C
Max. force Fy
600 N
Max. torque Mx
29.1 Nm
Max. feed force Fx
200 N
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Profile material
Wrought aluminum alloy, anodized
Slide carriage material
Steel
Spindle material
Steel
Fy with theoretical service life of 100 km (from a guide perspective only)
2208 N
Max. torque Mz
31.8 Nm
Product weight
4392 g
Material of end caps
Die cast aluminum, painted
Guide rail material
Steel
Slide material
Die-cast aluminum
Mz with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Static deflection (load at standstill)
0.1 % of axis length
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Steel

Related documents 8083385 Specs