8083424 Festo Electric Actuators

Product Details

• Insulation protection class
  B
• Permissible voltage fluctuations
  +/- 15 %
• Rotor position sensor
  Absolute encoder, single-turn
• Ready status indication
  LED
• Logic interface, connection type
  Plug
• Power supply, connection pattern
  00995989
• Number of digital logic outputs 24 V DC
  2
• DC nominal voltage
  24 V
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Protection class
  III
• Working stroke
  100 mm
• Size
  32
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Relative air humidity
  0 - 90 %
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, type of connection
  Plug
• Power supply, number of pins/wires
  4
• Max. current consumption
  3000 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Spindle pitch
8 mm/U
Mounting position
Any
Max. acceleration
5 m/s²
Fz with theoretical service life of 100 km (from a guide perspective only)
1104 N
Max. torque Mx
1.3 Nm
Product weight
1069 g
Feed constant
8 mm/U
Cover strip material
High-alloy stainless steel
Slide material
Die-cast aluminum
Spindle material
Steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Rotor position sensor measuring principle
Magnetic
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
IO-Link®, minimum cycle time
1 ms
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
Type code
ELGS
Motor type
Stepper motor
Additional functions
User interface Integrated end-position sensing
Degree of protection
IP40
Fy with theoretical service life of 100 km (from a guide perspective only)
552 N
Mx with theoretical service life of 100 km (from a guide perspective only)
5 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Material of end caps
Die cast aluminum, painted
Drive cover material
Die cast aluminum, painted
KC characters
KC EMC
Parameterization interface
IO-Link® User interface
Input switching logic
PNP (positive switching)
Position sensing
Motor encoder For proximity sensor
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Number of digital logic inputs
2
Guide value for payload, horizontal
2 kg
Storage temperature
-20 °C ... 60 °C
Rotor position sensor resolution
16 bit
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, Connection technology
Plug
Screw diameter
8 mm
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iy
38000 mm⁴
Max. torque My
1.1 Nm
Max. feed force Fx
40 N
Static deflection (load at standstill)
0.1 % of axis length
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Steel
Logic input specification
Based on IEC 61131-2, type 1
Homing
Fixed stop block positive Fixed stop block, negative
Display
LED
Switching logic at outputs
PNP (positive switching)
Logic interface, connection pattern
00992264
Guide value for payload, vertical
2 kg
Work range of logic input
24 V
Nominal current
3 A
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
IO-Link®, port class
A
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
Spindle type
Ball screw drive
Max. speed
0.18 m/s
Repetition accuracy
±0.015 mm
2nd moment of area Iz
45000 mm⁴
Max. force Fy
150 N
My with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Profile material
Wrought aluminum alloy, anodized
Slide carriage material
Steel
Symbol
00997292
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. force Fz
300 N
Max. torque Mz
1.1 Nm
Torsion moment of inertia It
1700 mm⁴
Moving mass
83.4 g
Guide rail material
Steel

Related documents 8083424 Specs