8083471 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Homing
  Fixed stop block positive Fixed stop block, negative
• Rotor position sensor measuring principle
  Magnetic
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Power supply, type of connection
  Plug
• Power supply, number of pins/wires
  4
• DC nominal voltage
  24 V
• IO-Link®, SIO mode support
  Yes
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, Connection technology
  Plug
• Working stroke
  200 mm
• Max. speed
  0.25 m/s
• Type code
  ELGS
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Relative air humidity
  0 - 90 %
• Position sensing
  Motor encoder For proximity sensor
• Switching logic at outputs
  PNP (positive switching)
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
Logic interface, number of poles/wires
8
Storage temperature
-20 °C ... 60 °C
IO-Link®, process data width IN
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, data memory required
500 byte
Screw diameter
10 mm
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Symbol
00997292
Ambient temperature
0 °C ... 50 °C
Degree of protection
IP40
Parameterization interface
IO-Link® User interface
Permissible voltage fluctuations
+/- 15 %
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Guide value for payload, vertical
5 kg
Guide value for payload, horizontal
10 kg
Rotor position sensor resolution
16 bit
IO-Link®, minimum cycle time
1 ms
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
Motor type
Stepper motor
Additional functions
User interface Integrated end-position sensing
Duty cycle
100%
2nd moment of area Iz
170000 mm⁴
Max. torque Mx
5.5 Nm
Max. feed force Fx
100 N
Product weight
2074 g
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Drive cover material
Die cast aluminum, painted
Insulation protection class
B
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Guide
Recirculating ball bearing guide
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic inputs
2
Work range of logic input
24 V
Nominal current
3 A
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data width OUT
2 Byte
Stroke reserve
0 mm
Spindle pitch
10 mm/U
Design
Electromechanical linear axis With integrated drive
Max. acceleration
5 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
2nd moment of area Iy
140000 mm⁴
Max. force Fz
600 N
My with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Moving mass
220 g
Cover strip material
High-alloy stainless steel
Slide material
Die-cast aluminum
Logic input specification
Based on IEC 61131-2, type 1
Rotor position sensor
Absolute encoder, single-turn
Input switching logic
PNP (positive switching)
Ready status indication
LED
Logic interface, connection type
Plug
Logic interface, connection pattern
00992264
Max. current of digital logic outputs
100 mA
Max. current consumption
3000 mA
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
IO-Link®, number of ports
1
Size
45
Mounting position
Any
Fy with theoretical service life of 100 km (from a guide perspective only)
1104 N
Max. torque Mz
4.7 Nm
Torsion moment of inertia It
8500 mm⁴
Material of end caps
Die cast aluminum, painted
Slide carriage material
Steel
Spindle material
Steel
Spindle type
Ball screw drive
Repetition accuracy
±0.015 mm
Certification
RCM compliance mark
Fz with theoretical service life of 100 km (from a guide perspective only)
2208 N
Mx with theoretical service life of 100 km (from a guide perspective only)
20 Nm
Feed constant
10 mm/U
Profile material
Wrought aluminum alloy, anodized
Spindle nut material
Steel
Max. force Fy
300 N
Max. torque My
4.7 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Static deflection (load at standstill)
0.1 % of axis length
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Steel

Related documents 8083471 Specs