Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

8083472 Festo Electric Actuators

Festo 8083472 spindle axis unit ELGS-BS-KF-45-300-10P-ST-M-H1-PLK-AA Working stroke: 300 mm, Size: 45, Stroke reserve: 0 mm, Spindle diameter: 10 mm, Spindle pitch: 10 mm/U
Festo

Part#:8083472

Manufacturer:Festo

Alt. Part#:ELGS-BS-KF-45-300-10P-ST-M-H1-PLK-AA

Product Lifecycle:Active

Get a quick Quote!

spindle axis unit ELGS-BS-KF-45-300-10P-ST-M-H1-PLK-AA Working stroke: 300 mm, Size: 45, Stroke reserve: 0 mm, Spindle diameter: 10 mm, Spindle pitch: 10 mm/U

About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8083472 Festo price in the box on the right side or send a quick quote.

Product Details

  • Insulation protection class
    B
  • Parameterization interface
    IO-Link® User interface
  • Note on ambient temperature
    Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
  • Position sensing
    Motor encoder For proximity sensor
  • KC characters
    KC EMC
  • Max. cable length
    15 m outputs 20 m for IO-Link® operation
  • Permissible voltage fluctuations
    +/- 15 %
  • Rotor position sensor measuring principle
    Magnetic
  • Characteristics of digital logic outputs
    Configurable Not galvanically isolated
  • Logic interface, connection technology
    M12x1, A-coded as per EN 61076-2-101
  • Power supply, type of connection
    Plug
  • Power supply, number of pins/wires
    4
  • Nominal current
    3 A
  • IO-Link®, process data width IN
    2 Byte
  • IO-Link®, process data content IN
    1 bit (state device) 1 bit (state out)
  • Protection class
    III
  • Size
    45
  • Rotor position sensor
    Absolute encoder, single-turn
  • Input switching logic
    PNP (positive switching)
  • DC nominal voltage
    24 V
  • Storage temperature
    -20 °C ... 60 °C
  • IO-Link®, SIO mode support
    Yes
  • IO-Link®, communication mode
    COM3 (230.4 kBd)
  • IO-Link®, port class
    A
  • IO-Link®, data memory required
    500 byte
  • Type code
    ELGS
  • Design
    Electromechanical linear axis With integrated drive
  • Temperature monitoring
    Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
  • Max. acceleration
    5 m/s²
  • Duty cycle
    100%
  • 2nd moment of area Iz
    170000 mm⁴
  • Fz with theoretical service life of 100 km (from a guide perspective only)
    2208 N
  • Logic input specification
    Based on IEC 61131-2, type 1
  • Homing
    Fixed stop block positive Fixed stop block, negative
  • Vibration resistance
    Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
  • Logic interface, connection type
    Plug
  • Power supply, connection pattern
    00995989
  • Max. current of digital logic outputs
    100 mA
  • Logic interface, number of poles/wires
    8
  • IO-Link®, minimum cycle time
    1 ms
  • IO-Link®, number of ports
    1
  • IO-Link®, Connection technology
    Plug
  • Spindle pitch
    10 mm/U
  • Mounting position
    Any
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
  • Relative air humidity
    0 - 90 %
  • Display
    LED
  • Ready status indication
    LED
  • Logic interface, connection pattern
    00992264
  • Guide value for payload, vertical
    5 kg
  • Number of digital logic inputs
    2
  • Rotor position sensor resolution
    16 bit
  • Max. current consumption
    3000 mA
  • IO-Link®, process data content OUT
    1 bit (move in) 1 bit (quit error)
  • IO-Link®, process data width OUT
    2 Byte
  • Working stroke
    300 mm
  • Screw diameter
    10 mm
  • Motor type
    Stepper motor
  • Spindle type
    Ball screw drive
  • Switching logic at outputs
    PNP (positive switching)
  • Characteristics of logic input
    Configurable Not galvanically isolated
  • Power supply, connection technology
    M12x1, T-coded as per EN 61076-2-111
  • Number of digital logic outputs 24 V DC
    2
  • Guide value for payload, horizontal
    10 kg
  • Work range of logic input
    24 V
  • IO-Link®, service data contents IN
    32 bit force 32 bit speed
  • IO-Link®, protocol version
    Device V 1.1
  • Stroke reserve
    0 mm
  • Certification
    RCM compliance mark
  • Guide
    Recirculating ball bearing guide
  • Symbol
    00997292
  • Repetition accuracy
    ±0.015 mm
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • Max. force Fz
    600 N
  • My with theoretical service life of 100 km (from a guide perspective only)
    17 Nm
  • Feed constant
    10 mm/U
  • Product weight
    2434 g
  • Drive cover material
    Die cast aluminum, painted
  • Additional functions
    User interface Integrated end-position sensing
  • Ambient temperature
    0 °C ... 50 °C
  • Max. force Fy
    300 N
  • Max. torque Mx
    5.5 Nm
  • Mx with theoretical service life of 100 km (from a guide perspective only)
    20 Nm
  • Torsion moment of inertia It
    8500 mm⁴
  • Moving mass
    220 g
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Slide material
    Die-cast aluminum
  • Max. speed
    0.25 m/s
  • Degree of protection
    IP40
  • Max. torque My
    4.7 Nm
  • Max. torque Mz
    4.7 Nm
  • Material of end caps
    Die cast aluminum, painted
  • Profile material
    Wrought aluminum alloy, anodized
  • Spindle material
    Steel
  • 2nd moment of area Iy
    140000 mm⁴
  • Max. feed force Fx
    100 N
  • Static deflection (load at standstill)
    0.1 % of axis length
  • Guide rail material
    Steel
  • Slide carriage material
    Steel
  • Fy with theoretical service life of 100 km (from a guide perspective only)
    1104 N
  • Mz with theoretical service life of 100 km (from a guide perspective only)
    17 Nm
  • Dynamic deflection (load moved)
    0.05% of axis length, maximum 0.5 mm
  • Cover strip material
    High-alloy stainless steel
  • Spindle nut material
    Steel

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 8083472 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo