8083474 Festo Electric Actuators

Product Details

• Insulation protection class
  B
• Logic input specification
  Based on IEC 61131-2, type 1
• Relative air humidity
  0 - 90 %
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Position sensing
  Motor encoder For proximity sensor
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection pattern
  00992264
• Power supply, number of pins/wires
  4
• Work range of logic input
  24 V
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, SIO mode support
  Yes
• Protection class
  III
• Working stroke
  500 mm
• Spindle pitch
  10 mm/U
• Design
  Electromechanical linear axis With integrated drive
• Additional functions
  User interface Integrated end-position sensing
• Permissible voltage fluctuations
  +/- 15 %
• Input switching logic
  PNP (positive switching)
• Logic interface, connection type
  Plug
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires
8
DC nominal voltage
24 V
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Screw diameter
10 mm
Max. acceleration
5 m/s²
Degree of protection
IP40
2nd moment of area Iy
140000 mm⁴
Mx with theoretical service life of 100 km (from a guide perspective only)
20 Nm
Torsion moment of inertia It
8500 mm⁴
Material of end caps
Die cast aluminum, painted
Slide carriage material
Steel
Slide material
Die-cast aluminum
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Parameterization interface
IO-Link® User interface
Switching logic at outputs
PNP (positive switching)
Power supply, connection pattern
00995989
Number of digital logic inputs
2
Guide value for payload, horizontal
10 kg
Rotor position sensor resolution
16 bit
Nominal current
3 A
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, number of ports
1
IO-Link®, port class
A
IO-Link®, Connection technology
Plug
Motor type
Stepper motor
Max. speed
0.25 m/s
Ambient temperature
0 °C ... 50 °C
Max. force Fz
600 N
Max. torque My
4.7 Nm
Fz with theoretical service life of 100 km (from a guide perspective only)
2208 N
Moving mass
220 g
Cover strip material
High-alloy stainless steel
Spindle nut material
Steel
KC characters
KC EMC
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Display
LED
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Max. current of digital logic outputs
100 mA
IO-Link®, process data width IN
2 Byte
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
Mounting position
Any
Spindle type
Ball screw drive
Repetition accuracy
±0.015 mm
2nd moment of area Iz
170000 mm⁴
Fy with theoretical service life of 100 km (from a guide perspective only)
1104 N
My with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Steel
Rotor position sensor
Absolute encoder, single-turn
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Rotor position sensor measuring principle
Magnetic
Ready status indication
LED
Power supply, type of connection
Plug
Guide value for payload, vertical
5 kg
Storage temperature
-20 °C ... 60 °C
Max. current consumption
3000 mA
IO-Link®, communication mode
COM3 (230.4 kBd)
Size
45
Type code
ELGS
Guide
Recirculating ball bearing guide
Symbol
00997292
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Duty cycle
100%
Max. force Fy
300 N
Max. torque Mx
5.5 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
17 Nm
Product weight
3154 g
Profile material
Wrought aluminum alloy, anodized
Guide rail material
Steel
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. torque Mz
4.7 Nm
Max. feed force Fx
100 N
Feed constant
10 mm/U
Static deflection (load at standstill)
0.1 % of axis length
Drive cover material
Die cast aluminum, painted

Related documents 8083474 Specs