8083572 Festo Electric Actuators

Product Details

• Drive pinion effective diameter
  24.83 mm
• Logic input specification
  Based on IEC 61131-2, type 1
• Rotor position sensor
  Absolute encoder, single-turn
• Relative air humidity
  0 - 90 %
• Homing
  Fixed stop block positive Fixed stop block, negative
• Input switching logic
  PNP (positive switching)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection type
  Plug
• KC characters
  KC EMC
• Insulation protection class
  B
• Permissible voltage fluctuations
  +/- 15 %
• Rotor position sensor measuring principle
  Magnetic
• Switching logic at outputs
  PNP (positive switching)
• Power supply, connection pattern
  00995989
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Parameterization interface
  IO-Link® User interface
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Display
  LED
• Characteristics of logic input
  Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Logic interface, number of poles/wires
8
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
Stroke reserve
0 mm
Mounting position
Horizontal
Degree of protection
IP40
Max. force Fy
600 N
Feed constant
78 mm/U
Max. cable length
15 m outputs 20 m for IO-Link® operation
Ready status indication
LED
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Storage temperature
-20 °C ... 60 °C
IO-Link®, process data width IN
2 Byte
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, data memory required
500 byte
Size
60
Type code
ELGS
Symbol
00997293
Max. acceleration
6 m/s²
Position sensing
Motor encoder For proximity sensor
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Number of digital logic inputs
2
Power supply, number of pins/wires
4
Nominal current
5.3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, protocol version
Device V 1.1
Working stroke
500 mm
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
DC nominal voltage
24 V
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, Connection technology
Plug
Guide value for payload, horizontal
4 kg
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
IO-Link®, port class
A
Toothed belt elongation
0.124 %
Guide
Recirculating ball bearing guide
Motor type
Stepper motor
Max. speed
1.3 m/s
Additional functions
User interface Integrated end-position sensing
2nd moment of area Iz
542000 mm⁴
Toothed belt pitch
3 mm
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Repetition accuracy
±0.1 mm
Ambient temperature
0 °C ... 50 °C
Moving mass
482 g
Duty cycle
100%
Certification
RCM compliance mark
Max. torque Mx
29.1 Nm
Torsion moment of inertia It
29800 mm⁴
Moving mass at 0 mm stroke
482 g
Profile material
Wrought aluminum alloy, anodized
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
2nd moment of area Iy
441000 mm⁴
Max. force Fz
1800 N
Max. torque My
31.8 Nm
Max. torque Mz
31.8 Nm
Material of end caps
Die cast aluminum, painted
Slide carriage material
Tempered steel
Max. feed force Fx
65 N
Product weight
5105 g
Drive cover material
Die cast aluminum, painted
Belt pulley material
High-alloy stainless steel
Slide weight
139 g
Cover strip material
Stainless steel strip
Slide material
Die-cast aluminum
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Tempered steel
Toothed belt material
Polychloroprene with glass fiber

Related documents 8083572 Specs