8083578 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Parameterization interface
  IO-Link® User interface
• Permissible voltage fluctuations
  +/- 15 %
• Position sensing
  Motor encoder For proximity sensor
• Ready status indication
  LED
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, type of connection
  Plug
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, data memory required
  500 byte
• Size
  60
• Toothed belt pitch
  3 mm
• Temperature monitoring
  Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
• Duty cycle
  100%
• 2nd moment of area Iy
  441000 mm⁴
• Max. torque Mz
  31.8 Nm
• Moving mass at 0 mm stroke
  482 g
• Drive cover material
  Die cast aluminum, painted
• Belt pulley material
  High-alloy stainless steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Insulation protection class
B
Rotor position sensor measuring principle
Magnetic
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Number of digital logic outputs 24 V DC
2
Logic interface, number of poles/wires
8
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Protection class
III
Max. acceleration
6 m/s²
Ambient temperature
0 °C ... 50 °C
Max. torque Mx
29.1 Nm
Torsion moment of inertia It
29800 mm⁴
Cover strip material
Stainless steel strip
Guide rail material
Tempered steel
Rotor position sensor
Absolute encoder, single-turn
Homing
Fixed stop block positive Fixed stop block, negative
Display
LED
Logic interface, connection type
Plug
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, Connection technology
Plug
Working stroke
1800 mm
Mounting position
Horizontal
Additional functions
User interface Integrated end-position sensing
Repetition accuracy
±0.1 mm
Certification
RCM compliance mark
Max. force Fz
1800 N
Max. torque My
31.8 Nm
Slide weight
139 g
Profile material
Wrought aluminum alloy, anodized
Material of end caps
Die cast aluminum, painted
Logic input specification
Based on IEC 61131-2, type 1
Relative air humidity
0 - 90 %
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Guide value for payload, horizontal
4 kg
Storage temperature
-20 °C ... 60 °C
Nominal current
5.3 A
IO-Link®, process data width OUT
2 Byte
IO-Link®, port class
A
Type code
ELGS
Motor type
Stepper motor
Design
Electromechanical linear axis With integrated drive
Degree of protection
IP40
2nd moment of area Iz
542000 mm⁴
Moving mass
482 g
Product weight
10695 g
Slide carriage material
Tempered steel
Toothed belt material
Polychloroprene with glass fiber
Drive pinion effective diameter
24.83 mm
Max. cable length
15 m outputs 20 m for IO-Link® operation
Input switching logic
PNP (positive switching)
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Switching logic at outputs
PNP (positive switching)
Number of digital logic inputs
2
Power supply, number of pins/wires
4
DC nominal voltage
24 V
IO-Link®, minimum cycle time
1 ms
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, number of ports
1
Toothed belt elongation
0.124 %
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
Symbol
00997293
Max. speed
1.3 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fy
600 N
Max. feed force Fx
65 N
Feed constant
78 mm/U
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide material
Die-cast aluminum

Related documents 8083578 Specs