8083666 Festo Electric Actuators
Part#:8083666
Manufacturer:Festo
Alt. Part#:ELGS-TB-KF-45-300-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
toothed belt axis unit ELGS-TB-KF-45-300-ST-M-H1-PLK-AA Effective diameter of drive pinion: 19,1 mm, Working stroke: 300 mm, Size: 45, Stroke reserve: 0 mm, Toothed-belt stretch: 0,187 %
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8083666 Festo price in the box on the right side or send a quick quote.
Product Details
- Rotor position sensor Absolute encoder, single-turn
- Position sensing Motor encoder For proximity sensor
- Ready status indication LED
- Logic interface, connection pattern 00992264
- Guide value for payload, horizontal 2.5 kg
- Work range of logic input 24 V
- IO-Link®, process data width IN 2 Byte
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, protocol version Device V 1.1
- Working stroke 300 mm
- Toothed belt elongation 0.187 %
- Parameterization interface IO-Link® User interface
- KC characters KC EMC
- Relative air humidity 0 - 90 %
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Switching logic at outputs PNP (positive switching)
- Logic interface, connection type Plug
- Power supply, type of connection Plug
- Max. current of digital logic outputs 100 mA
- Rotor position sensor resolution 16 bit
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, port class A
- Size 45
- Mounting position Horizontal
- Temperature monitoring Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Logic input specification Based on IEC 61131-2, type 1
- Insulation protection class B
- Permissible voltage fluctuations +/- 15 %
- Input switching logic PNP (positive switching)
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Drive pinion effective diameter 19.1 mm
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Homing Fixed stop block positive Fixed stop block, negative
- Display LED
- Characteristics of logic input Configurable Not galvanically isolated
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Power supply, number of pins/wires 4
- Storage temperature -20 °C ... 60 °C
- Max. torque Mz 4.7 Nm
- Rotor position sensor measuring principle Magnetic
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Number of digital logic inputs 2
- DC nominal voltage 24 V
- Max. current consumption 5300 mA
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- Protection class III
- IO-Link®, data memory required 500 byte
- Type code ELGS
- Symbol 00997293
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Max. torque My 4.7 Nm
- Max. feed force Fx 75 N
- Drive cover material Die cast aluminum, painted
- Slide material Die-cast aluminum
- Power supply, connection pattern 00995989
- Number of digital logic outputs 24 V DC 2
- Logic interface, number of poles/wires 8
- Nominal current 5.3 A
- IO-Link®, SIO mode support Yes
- IO-Link®, process data width OUT 2 Byte
- IO-Link®, number of ports 1
- Stroke reserve 0 mm
- Design Electromechanical linear axis With integrated drive
- Additional functions User interface Integrated end-position sensing
- Repetition accuracy ±0.1 mm
- Degree of protection IP40
- Moving mass at 0 mm stroke 169 g
- IO-Link®, minimum cycle time 1 ms
- IO-Link®, communication mode COM3 (230.4 kBd)
- IO-Link®, Connection technology Plug
- Toothed belt pitch 2 mm
- Motor type Stepper motor
- Max. acceleration 6 m/s²
- Certification RCM compliance mark
- Max. force Fy 300 N
- Max. torque Mx 5.5 Nm
- Guide Recirculating ball bearing guide
- Max. speed 1.2 m/s
- Ambient temperature 0 °C ... 50 °C
- 2nd moment of area Iz 170000 mm⁴
- Torsion moment of inertia It 8500 mm⁴
- Moving mass 169 g
- Profile material Wrought aluminum alloy, anodized
- Slide carriage material Tempered steel
- Duty cycle 100%
- 2nd moment of area Iy 140000 mm⁴
- Max. force Fz 600 N
- Slide weight 55 g
- Guide rail material Tempered steel
- Feed constant 60 mm/U
- Product weight 2480 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Belt pulley material High-alloy stainless steel
- Cover strip material Stainless steel strip
- Material of end caps Die cast aluminum, painted
- Toothed belt material Polychloroprene with glass fiber
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8083666 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨