Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

8083801 Festo Electric Actuators

Festo 8083801 mini slide unit EGSS-BS-KF-32-25-8P-ST-M-H1-PLK-AA Working stroke: 25 mm, Size: 32, Stroke reserve: 0 mm, Reversing backlash: 150 µm, Spindle diameter: 8 mm
Festo

Part#:8083801

Manufacturer:Festo

Alt. Part#:EGSS-BS-KF-32-25-8P-ST-M-H1-PLK-AA

Product Lifecycle:Active

Get a quick Quote!

mini slide unit EGSS-BS-KF-32-25-8P-ST-M-H1-PLK-AA Working stroke: 25 mm, Size: 32, Stroke reserve: 0 mm, Reversing backlash: 150 µm, Spindle diameter: 8 mm

About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8083801 Festo price in the box on the right side or send a quick quote.

Product Details

  • KC characters
    KC EMC
  • Switching logic at outputs
    PNP (positive switching)
  • Shock resistance
    Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
  • Rotor position sensor
    Absolute encoder, single-turn
  • Ready status indication
    LED
  • Permissible voltage fluctuations
    +/- 15 %
  • Power supply, connection pattern
    00995989
  • DC nominal voltage
    24 V
  • Logic input specification
    Based on IEC 61131-2, type 1
  • Input switching logic
    PNP (positive switching)
  • Logic interface, connection pattern
    00992264
  • Logic interface, connection technology
    M12x1, A-coded as per EN 61076-2-101
  • Power supply, number of pins/wires
    4
  • Max. current of digital logic outputs
    100 mA
  • Additional functions
    User interface Integrated end-position sensing
  • Insulation protection class
    B
  • Vibration resistance
    Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
  • Relative air humidity
    0 - 90 %
  • Parameterization interface
    IO-Link® User interface
  • Rotor position sensor measuring principle
    Magnetic
  • Power supply, type of connection
    Plug
  • Characteristics of digital logic outputs
    Configurable Not galvanically isolated
  • Characteristics of logic input
    Configurable Not galvanically isolated
  • Note on ambient temperature
    Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
  • Logic interface, connection type
    Plug
  • Number of digital logic inputs
    2
  • Max. current consumption
    3000 mA
  • IO-Link®, number of ports
    1
  • IO-Link®, service data contents IN
    32 bit force 32 bit speed
  • Display
    LED
  • Max. cable length
    15 m outputs 20 m for IO-Link® operation
  • Power supply, connection technology
    M12x1, T-coded as per EN 61076-2-111
  • Logic interface, number of poles/wires
    8
  • Storage temperature
    -20 °C ... 60 °C
  • Work range of logic input
    24 V
  • Number of digital logic outputs 24 V DC
    2
  • Rotor position sensor resolution
    16 bit
  • Nominal current
    3 A
  • IO-Link®, communication mode
    COM3 (230.4 kBd)
  • IO-Link®, minimum cycle time
    1 ms
  • IO-Link®, process data content IN
    1 bit (state device) 1 bit (state out)
  • Screw diameter
    8 mm
  • Type code
    EGSS
  • Symbol
    00997294
  • Duty cycle
    100%
  • CE marking (see declaration of conformity)
    As per EU EMC directive As per EU RoHS directive
  • Max. force Fy
    991 N
  • Guide value for payload, horizontal
    2 kg
  • IO-Link®, Connection technology
    Plug
  • IO-Link®, port class
    A
  • IO-Link®, protocol version
    Device V 1.1
  • IO-Link®, process data width IN
    2 Byte
  • IO-Link®, process data width OUT
    2 Byte
  • Working stroke
    25 mm
  • IO-Link®, process data content OUT
    1 bit (move in) 1 bit (quit error)
  • Protection class
    III
  • IO-Link®, SIO mode support
    Yes
  • Reversing backlash
    150 µm
  • Size
    32
  • Stroke reserve
    0 mm
  • Motor type
    Stepper motor
  • Position sensing
    Motor encoder For proximity sensor
  • Degree of protection
    IP40
  • Dynamic basic load rating, ball screw drive
    2000 N
  • Max. feed force Fx
    60 N
  • Linear guide statistical basic load rating
    3880 N
  • IO-Link®, data memory required
    500 byte
  • Spindle pitch
    8 mm/U
  • Mounting position
    Any
  • Spindle type
    Ball screw drive
  • Repetition accuracy
    ±0.015 mm
  • Ambient temperature
    0 °C ... 50 °C
  • Linear guide dynamic basic load rating
    2135 N
  • Max. force Fz
    991 N
  • Max. radial force on actuator shaft
    140 N
  • Design
    Electrical mini-slide With integrated drive
  • Homing
    Fixed stop block positive Reference switch
  • Max. speed
    0.19 m/s
  • Corrosion resistance class (CRC)
    0 - No corrosion stress
  • Guide
    Recirculating ball bearing guide
  • Max. acceleration
    5 m/s²
  • Certification
    RCM compliance mark
  • Max. torque Mx
    3.4 Nm
  • Max. torque Mz
    3.17 Nm
  • Guide value for payload, vertical
    2 kg
  • Feed constant
    8 mm/U
  • Reference value, running performance
    5000 km
  • Additional moving mass per 10 mm stroke
    12 g
  • Fixed bearing dynamic basic load rating
    3795 N
  • Max. torque My
    3.17 Nm
  • Ball screw drive statistical basic load rating
    3700 N
  • Moving mass at 0 mm stroke
    149 g
  • Type of mounting
    With internal thread With cylindrical pin
  • Guide rail material
    Roller bearing steel
  • Maintenance interval
    Life-time lubrication
  • Basic weight with 0 mm stroke
    924 g
  • Note on materials
    Contains paint-wetting impairment substances RoHS-compliant
  • Statistical fixed bearing load rating
    1792 N
  • Additional weight per 10 mm stroke
    30 g
  • Product weight
    999 g
  • Slide carriage material
    Roller bearing steel
  • Housing material
    Wrought aluminum alloy, anodized
  • Spindle material
    Roller bearing steel
  • Material of yoke plate
    Wrought aluminum alloy, anodized
  • Piston rod material
    High-alloy stainless steel
  • Spindle nut material
    Roller bearing steel
  • Slide material
    Wrought aluminum alloy, anodized

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents 8083801 Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Festo

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Festo Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo