8083803 Festo Electric Actuators
Part#:8083803
Manufacturer:Festo
Alt. Part#:EGSS-BS-KF-32-75-8P-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
mini slide unit EGSS-BS-KF-32-75-8P-ST-M-H1-PLK-AA Working stroke: 75 mm, Size: 32, Stroke reserve: 0 mm, Reversing backlash: 150 µm, Spindle diameter: 8 mm
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8083803 Festo price in the box on the right side or send a quick quote.
Product Details
- Switching logic at outputs PNP (positive switching)
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Logic input specification Based on IEC 61131-2, type 1
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Rotor position sensor measuring principle Magnetic
- Power supply, connection pattern 00995989
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- DC nominal voltage 24 V
- Logic interface, number of poles/wires 8
- Nominal current 3 A
- IO-Link®, port class A
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- Size 32
- Relative air humidity 0 - 90 %
- Parameterization interface IO-Link® User interface
- KC characters KC EMC
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Rotor position sensor Absolute encoder, single-turn
- Characteristics of logic input Configurable Not galvanically isolated
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Input switching logic PNP (positive switching)
- Logic interface, connection pattern 00992264
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Power supply, number of pins/wires 4
- Rotor position sensor resolution 16 bit
- IO-Link®, process data width IN 2 Byte
- IO-Link®, SIO mode support Yes
- Stroke reserve 0 mm
- Motor type Stepper motor
- Position sensing Motor encoder For proximity sensor
- Degree of protection IP40
- Fixed bearing dynamic basic load rating 3795 N
- Max. torque My 3.17 Nm
- Guide value for payload, vertical 2 kg
- Additional functions User interface Integrated end-position sensing
- Insulation protection class B
- Ready status indication LED
- Permissible voltage fluctuations +/- 15 %
- Number of digital logic inputs 2
- Max. current consumption 3000 mA
- Work range of logic input 24 V
- IO-Link®, communication mode COM3 (230.4 kBd)
- IO-Link®, minimum cycle time 1 ms
- Protection class III
- Reversing backlash 150 µm
- Spindle pitch 8 mm/U
- Symbol 00997294
- Homing Fixed stop block positive Reference switch
- Repetition accuracy ±0.015 mm
- Linear guide dynamic basic load rating 2135 N
- Max. feed force Fx 60 N
- Ball screw drive statistical basic load rating 3700 N
- Maintenance interval Life-time lubrication
- Basic weight with 0 mm stroke 924 g
- Slide carriage material Roller bearing steel
- Spindle material Roller bearing steel
- Display LED
- Logic interface, connection type Plug
- Max. current of digital logic outputs 100 mA
- IO-Link®, number of ports 1
- Power supply, type of connection Plug
- Number of digital logic outputs 24 V DC 2
- Storage temperature -20 °C ... 60 °C
- IO-Link®, Connection technology Plug
- IO-Link®, protocol version Device V 1.1
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- IO-Link®, data memory required 500 byte
- Working stroke 75 mm
- Type code EGSS
- Guide Recirculating ball bearing guide
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, process data width OUT 2 Byte
- Screw diameter 8 mm
- Spindle type Ball screw drive
- Duty cycle 100%
- Mounting position Any
- Max. acceleration 5 m/s²
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Design Electrical mini-slide With integrated drive
- Max. speed 0.19 m/s
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature 0 °C ... 50 °C
- Dynamic basic load rating, ball screw drive 2000 N
- Max. radial force on actuator shaft 140 N
- Feed constant 8 mm/U
- Additional moving mass per 10 mm stroke 12 g
- Slide material Wrought aluminum alloy, anodized
- Max. force Fy 991 N
- Max. force Fz 991 N
- Max. torque Mx 3.4 Nm
- Certification RCM compliance mark
- Max. torque Mz 3.17 Nm
- Guide value for payload, horizontal 2 kg
- Statistical fixed bearing load rating 1792 N
- Reference value, running performance 5000 km
- Type of mounting With internal thread With cylindrical pin
- Linear guide statistical basic load rating 3880 N
- Moving mass at 0 mm stroke 149 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Material of yoke plate Wrought aluminum alloy, anodized
- Spindle nut material Roller bearing steel
- Additional weight per 10 mm stroke 30 g
- Product weight 1150 g
- Housing material Wrought aluminum alloy, anodized
- Piston rod material High-alloy stainless steel
- Guide rail material Roller bearing steel
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8083803 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
