1067327 Phoenix Contact UPS (DC)

Product Details

• Depth
  125 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C (> 50 °C: 2,5 % / K)
• Typical national grid voltage
  120 V AC
• Current consumption, battery operation
  19 A (24 V DC)
• Switch-over time
  < 10 ms
• Overload capability, battery operation
  105 % (Permanent)
• Output fuse, voltage
  400 V
• Height
  130 mm
• Max. permissible relative humidity (operation)
  ≤ 95 %
• Input voltage range
  90 V AC ... 264 V AC
• Frequency range (fN)
  45 Hz ... 65 Hz
• Real power
  400 W
• Connection in series
  No
• Width
  180 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage
  24 V DC
• Permissible backup fuse
  50 A
• Power factor (cos phi)
  0.8
• UPS classification
  VFD-SS-311
• Output voltage
  120 V AC ±2 %
Installation distance right/left
0 mm / 0 mm
Degree of protection
IP20
Nominal input voltage range
100 V AC ... 240 V AC
Current consumption
6.9 A (100 V AC)
Crest factor
2.8
Apparent power
500 VA
Nominal capacity range
3.4 Ah ... 190 Ah (5x 38 Ah)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Installation height
≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Voltage type of supply voltage
AC
Connection in parallel
no
Overload capability, mains operation
in accordance with internal fuse
Nominal output current (IN)
4.17 A (120 V AC)
Output fuse, current
10 A
Fuse
gRL
Deep discharge protection
20 V DC ... 24 V DC (can be parameterized)
Fast transients (burst)
EN 61000-4-4
Output
± 2 kV
Power frequency magnetic field
EN 61000-4-8
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Installation distance top/bottom
50 mm / 50 mm
Maximum power dissipation in no-load condition
approx. 23 W (120 V AC)
Power loss nominal load max.
approx. 57 W (120 V AC)
Nominal output frequency
60 Hz
Form of output voltage
Pure sine
Total harmonic distortion factor (THD)
< 3 % (linear load)
Charge current
max. 5 A
Battery technology
VRLA, VRLA-WTR, LI-ION (see section: Ordering data)
MTBF (IEC 61709, SN 29500)
445469 h (40 °C)
Protection class
I
Connection method
Screw connection
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Interface
USB (Modbus/RTU)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
Frequency range
0.15 MHz ... 80 MHz
Comments
Criterion A
Input
± 2 kV
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27040705
End-of-charge voltage
24 V DC ... 31 V DC (temperature compensated)
Charge characteristic curve
IU0U
Net weight
2.5 kg
Efficiency
> 97 % (100 % load, with charged energy storage)
Stripping length
8 mm
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 1.5 mm²
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Conductor cross section AWG
30 ... 12
Standards/regulations
EN 62040-1
Standard designation
Uninterruptible power supply systems
Electrostatic discharge
EN 61000-4-2
Contact discharge
± 6 kV
Discharge in air
± 8 kV
Test field strength
10 V/m
Signal
30 A/m
Conducted interference
EN 61000-4-6
Frequency
50 Hz