1067325 Phoenix Contact DC/AC Converters

Product Details

• ECLASS 11.0
  27024390
• Width
  180 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C (> 50 °C: 2,5 % / K)
• Max. permissible relative humidity (operation)
  ≤ 95 %
• Input voltage range DC
  20 V DC ... 30 V DC
• Maximum power dissipation in no-load condition
  typ. 21 W (120 V AC)
• Real power
  480 W
• Connection in parallel
  yes
• Efficiency
  > 86 % (120 V AC)
• Conductor cross section solid
  0.2 mm² ... 1.5 mm²
• Flexible conductor cross section (ferrule with plastic sleeve)
  0.2 mm² ... 1.5 mm²
• Contact discharge
  ± 6 kV
• Output
  ± 2 kV (symmetrical)
• Conducted interference
  EN 61000-4-6
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  IP20
• Current consumption
  typ. 23 A
• Derating
  50 °C ... 60 °C (2.5%/K)
• Distortion factor of non-linear load
  < 8 % (non-linear load)
MTBF (IEC 61709, SN 29500)
532525 h (40 °C)
Conductor cross section AWG
30 ... 12
Discharge in air
± 8 kV
Comments
Criterion A
Input
± 1 kV (symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27024390
Installation distance right/left
0 mm / 0 mm
Installation height
≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Form of output voltage
Pure sine
Apparent power
600 VA
Connection in series
No
Connection method
Screw connection
Torque
0.5 Nm ... 0.6 Nm
Electromagnetic HF field
EN 61000-4-3
Test field strength
10 V/m
Power frequency magnetic field
EN 61000-4-8
Frequency
50 Hz
ECLASS 10.0.1
27024390
Height
130 mm
Degree of pollution
2
Output voltage
120 V AC ±2 % (100 V AC / 6 A...130 V AC / 4,6 A)
Nominal output frequency
60 Hz 50 Hz ±0.5 %
Crest factor
2.8
Distortion factor of linear load
< 3 % (linear load)
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
0.15 MHz ... 80 MHz
Surge voltage load (surge)
EN 61000-4-5
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Depth
125 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage
24 V DC
Nominal output current (IN)
5 A (120 V AC)
Power loss nominal load max.
typ. 72 W (120 V AC)
Power factor (cos phi)
0.8
Overload capability, mains operation
105 % (Permanent)
Net weight
2.5 kg
Protection class
I
Stripping length
8 mm
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Electrostatic discharge
EN 61000-4-2
Fast transients (burst)
EN 61000-4-4
Signal
30 A/m
REACh SVHC
Lead 7439-92-1