3044102 Phoenix Contact Terminal Blocks

Product Details

• Note
  Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
• Conductor cross section solid max.
  6 mm²
• Min. AWG conductor cross section, flexible
  26
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Screw thread
  M3
• Tightening torque max
  0.8 Nm
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section flexible max.
  6 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Max. AWG conductor cross section, flexible
  10
• 2 conductors with same cross section, stranded min.
  0.14 mm²
• ETIM 6.0
  EC000897
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section AWG max.
  10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Maximum load current
41 A (with 6 mm² conductor cross section)
Ambient temperature (assembly)
-5 °C ... 70 °C
Insulating material group
I
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Open side panel
Yes
Finger protection
guaranteed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Rated surge voltage
8 kV
Result of surge voltage test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
6 mm²
Nominal voltage UN
1000 V
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Short-time current
0.72 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
UNSPSC 21.0
39121410
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
ECLASS 9.0
27141120
Overvoltage category
III
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
UNSPSC 11
39121410
UNSPSC 18.0
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410
Number of levels
1
Color
gray
Result of temperature-rise test
Test passed
UNSPSC 7.0901
39121410
Flammability rating according to UL 94
V0
Result of voltage-drop test
Test passed
Number of connections
2
Area of application
Railway industry
End cover width
2.2 mm
Back of the hand protection
guaranteed
ETIM 7.0
EC000897
Potentials
1
Insulating material
PA
Nominal cross section
4 mm²
Acceleration
5g
Connection method
Screw connection
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Result of power-frequency withstand voltage test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
47.7 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Stripping length
9 mm
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible min.
0.14 mm²
ECLASS 4.1
27141100
Bending test rotation speed
10 rpm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Shock test result
Test passed
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
6.2 mm
Tightening torque, min
0.6 Nm
2 conductors with same cross section, solid min.
0.14 mm²
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 4.0
EC000897
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Maximum power dissipation for nominal condition
1.02 W
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
46.9 mm
Nominal current IN
32 A (with 4 mm² conductor cross section)
Test duration per axis
5 h
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
55 mm
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ASD level
1.857 (m/s2)2/Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)