1086465 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Insulating material
  PA
• Insulating material group
  II
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Conductor cross section tensile test
  50 mm²
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Note
  The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
• Nominal cross section
  50 mm²
• Color
  gray
• Nominal current IN
  150 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Power frequency withstand voltage setpoint
  2.2 kV
• Tensile test result
  Test passed
• Conductor cross section short circuit testing
  50 mm²
• Number of positions
  1
• Degree of pollution
  3
• Maximum load current
  150 A (with 50 mm² conductor cross section)
• Open side panel
  No
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short-time current
6 kA
Potentials
1
Rated surge voltage
8 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Tractive force setpoint
236 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Number of connections
2
Flammability rating according to UL 94
V0
Overvoltage category
III
Surge voltage test setpoint
9.8 kV
Bending test conductor cross section/weight
2.5 mm² / 0.7 kg
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Length
82.5 mm
Height
51 mm
Height NS 35/7,5
51 mm
Screw thread
M10
Conductor cross section solid min.
4 mm²
Conductor cross section AWG max.
1/0
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
ECLASS 4.0
27141120
Result of temperature-rise test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Height NS 35/15
58.5 mm
Stripping length
23 mm
Conductor cross section solid max.
50 mm²
Conductor cross section flexible min.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
2 conductors with same cross section, stranded max.
16 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
Back of the hand protection
guaranteed
Setpoint
10 N
Proof of thermal characteristics (needle flame) effective duration
10 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
400 °C
Tightening torque max
12 Nm
Conductor cross section AWG min.
6
Conductor cross section flexible max.
50 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Nominal voltage UN
1000 V
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Width
19.2 mm
Connection method
Screw connection
Connection in acc. with standard
IEC 61238-1
Tightening torque, min
4 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
2.5 mm²
ECLASS 11.0
27141120
ECLASS 4.1
27141120
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
ECLASS 5.0
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
ECLASS 9.0
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410