1086476 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  1
• Color
  blue
• Rated surge voltage
  8 kV
• Surge voltage test setpoint
  9.8 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Conductor cross section tensile test
  95 mm²
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Shock form
  Half-sine
• Width
  25.1 mm
• Number of levels
  1
• Overvoltage category
  III
• Nominal voltage UN
  1000 V
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Test spectrum
  Service life test category 2, bogie-mounted
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
Height
58 mm
Connection method
Screw connection
Conductor cross section solid min.
16 mm²
Conductor cross section flexible max.
70 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
ECLASS 4.0
27141120
ETIM 4.0
EC000897
ETIM 2.0
EC000897
UNSPSC 11
39121410
Nominal cross section
95 mm²
Insulating material group
II
Nominal current IN
232 A
Power frequency withstand voltage setpoint
2.2 kV
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
16 mm² / 2.9 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
95 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Length
93.6 mm
Height NS 35/15
65.5 mm
Tightening torque max
20 Nm
Conductor cross section AWG min.
4
Conductor cross section flexible, with ferrule without plastic sleeve min.
16 mm²
2 conductors with same cross section, stranded min.
16 mm²
ECLASS 4.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Note
The values for aluminum conductors relate to rigid and multi-stranded conductors in accordance with EN 60228.Application notes on connecting aluminum conductors can be found in the download area.
Potentials
1
Insulating material
PA
Flammability rating according to UL 94
V0
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Shock duration
18 ms
Screw thread
M14
Conductor cross section flexible min.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
16 mm²
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410
Number of connections
2
Degree of pollution
3
Maximum load current
232 A (with 95 mm² conductor cross section)
Open side panel
No
Bending test turns
135
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
400 °C
Number of shocks per direction
3
Height NS 35/7,5
58 mm
Connection in acc. with standard
IEC 61238-1
Conductor cross section solid max.
95 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
2 conductors with same cross section, stranded max.
35 mm²
ECLASS 5.0
27141120
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Setpoint
15 N
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
10 s
Stripping length
27 mm
Result of voltage-drop test
Test passed
Conductor cross section AWG max.
4/0
Tractive force setpoint
351 N
Short-time current
11.4 kA
China RoHS
Environmentally friendly use period: unlimited = EFUP-e