1086901 Phoenix Contact Programmable Logic Controllers

Product Details

• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B, 2 kV
• Group
  A, B / IIC
• IECEx
  IECEx UL 20.0044XEx ec [ia Ga] IIC T4 Gc[Ex ia Da] IIIC
• ECLASS 10.0.1
  27242604
• Width
  53.6 mm
• Ambient temperature (operation)
  -25 °C ... 60 °C (Standard)
• Air pressure (operation)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Note on the connection method
  Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
• Conductor cross section flexible min.
  0.2 mm²
• Mounting type
  DIN rail
• Mounting position
  any (no temperature derating)
• Supply voltage
  24 V DC
• Output name
  Digital outputs
• Output voltage
  24 V
• Nominal output voltage
  24 V
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion A, 6 kV contact discharge, 8 kV air discharge
• Protection class
  III (IEC 61140, EN 61140, VDE 0140-1)
• ECLASS 9.0
  27242604
• Utilization restriction
  Use in potentially explosive areas is not permitted in China.
• Note on dimensions
  The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715).
Permissible humidity (storage/transport)
5 % ... 95 % (non-condensing)
Degree of protection
IP20
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Note on weight specifications
with connectors and bus base module
Number
2
ATEX
DEMKO 20 ATEX 2370XII 3(1)G Ex ec [ia Ga] IIC T4 GcII (1)D [Ex ia Da] IIIC
Depth
77.14 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Designation
Supply for digital output modules (UO)
Conductor cross section solid max.
1.5 mm²
Stripping length
8 mm
Net weight
0 g
Maximum altitude
3000 m
Current consumption
max. 420 mA
Number of outputs
4
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
Height
129.9 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG max.
16
Color
traffic grey A RAL 7042
Transmission speed
100 Mbps
ECLASS 11.0
27242604
Connection technology
3-conductor
Test section
5 V supply of the local bus (UBus) / 24 V supply (I/Os) 500 V AC 50 Hz 1 min.
China RoHS
Environmentally Friendly Use Period = 25;
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Interference emission
Noise emission test as per EN 61000-6-4 Class A
UL, USA/Canada
Ind. Cont. Eq. (E238705) also ListedInd. Cont. Eq. for haz. loc. E196811Install in: Class I, Div. 2, Groups A, B, C, D T4Intrinsically safe outputs for: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; [Ex ia] Haz locClass I, Zone 2, AEx e
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion A, supply lines DC: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical), ±1 kV to shielded I/O cables