1088737 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Maximum load current
  32 A (with 6 mm² conductor cross section, rigid)
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• UNSPSC 11
  39121410
• Nominal cross section
  4 mm²
• Area of application
  Railway industry
• Connection in acc. with standard
  IEC 60947-7-1
• Nominal voltage UN
  800 V
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Short-time current
  0.72 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test duration per axis
  5 h
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Number of connections
4
Degree of pollution
3
Nominal current IN
28 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Height
56 mm
Height NS 35/7,5
57.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
2
Insulating material
PA
Overvoltage category
III
Open side panel
Yes
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
6 mm²
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
99.5 mm
Conductor cross section AWG min.
24
Conductor cross section flexible max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.0
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
65 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Stripping length
9 mm ... 11 mm
ECLASS 11.0
27141120
Internal cylindrical gage
A4
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410