1104976 Phoenix Contact Electrical Safety Devices

Product Details

• Indication
  2 x LED (red)
• Stripping length
  7 mm
• Height
  112.58 mm
• Ambient temperature (operation)
  -10 °C ... 55 °C (observe derating)
• Max. permissible humidity (storage/transport)
  95 % (non-condensing)
• Power consumption at US
  < 12 mW (Outputs inactive)
• Protective circuit
  Suppressor diode
• Number of inputs
  4
• Cable length
  max. 100 m (per output)
• Nominal output voltage
  24 V DC (Supply via A1)
• Ohmic load
  min. 10 Ω (Observe limiting continuous current)
• Switching frequency
  max. 1/4 x tCycle [Hz]
• Output voltage range
  18.2 V DC ... 27.8 V DC (US - 1 V)
• Nominal operating mode
  100% operating factor
• Min. degree of protection of inst. location
  IP54
• Housing color
  yellow
• Protection class
  III (EN 50178)
• Depth
  113.6 mm
• Rated control supply current IS
  < 0.5 mA (Outputs inactive)
• Description
  Output supply, O3, O4
Protective circuit/component
Suppressor diode
Nominal output voltage range
18.6 V DC ... 28.2 V DC (US - 0.6 V)
Max. inductive load
max. 2.4 mH
Short-circuit protection
Yes (self-limitation at 1.1 A)
Maximum inrush current
1.1 A (Δt = 3 s  at Us)
Restart time
min. 5 s (Boot time)
Assembly instructions
Observe derating
Connection method
Screw connection
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Performance level (PL)
e (2-channel wiring)
Standards/regulations
EN 50178
Rated surge voltage/insulation
Basic insulation 4 kV between 24 V power supply and I/Os to the housing
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Response time
see user manual
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Torque
0.5 Nm ... 0.6 Nm
Designation
Air clearances and creepage distances between the power circuits
Filter time
250 ms ±2 ms (Test pulse rate > 500 ms)
Description of the input
IEC 61131-2 type 3
Output description
PNP, IEC 61131-2 Typ 0,1
Limiting continuous current
100 mA (per channel)
Error detection time at 1-channel structure
< 3.5 s (OFF state)
Voltage
24 V DC (via 24 V)
Cycle time
see user manual
Housing material
Polyamide PA non-reinforced
pluggable
Yes
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Screw thread
M3
Rated insulation voltage
250 V AC
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 11.0
27371819
Width
22.61 mm
Max. permissible relative humidity (operation)
95 % (non-condensing)
Current consumption
typ. 10 mA (typically with US)
Input name
Reset inputs
Input voltage range "1" signal
11 V DC ... 28.8 V DC
Input current range "0" signal
< 1 mA
Output name
O1, O2, O3, O4
Leakage current
max. 100 µA
Test pulses
< 120 µs (Test pulse width of low test pulses)
Mounting position
vertical or horizontal
Mounting type
DIN rail mounting
Status display
12 x LED (yellow)
Safety Integrity Level (SIL)
2
Degree of pollution
2
Conformance
CE-compliant
Maximum altitude
≤ 2000 m (Above sea level)
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (provide external protection, typically 5 A)
Inrush current
max. 2.5 A (Δt  1 ms)
Input voltage range "0" signal
0 V DC ... 5 V DC
Max. permissible overall conductor resistance
1.2 kΩ (Input and reset circuit at US)
Number of outputs
8
Output voltage when switched off
max. 0.1 V
Max. capacitive load
max. 820 nF
Discharging circuit
Yes, internal
Net weight
159 g
Degree of protection
IP20
Operating voltage display
1 x green LED
Conductor cross-section AWG
24 ... 12
Safety Integrity Level Claim Limit (SIL CL)
3 (2-channel wiring)
Overvoltage category
II
ECLASS 10.0.1
27371819
Stop category
0
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
ECLASS 9.0
27371819