1104981 Phoenix Contact Electrical Safety Devices

Product Details

• Height
  112.58 mm
• Max. permissible relative humidity (operation)
  95 % (non-condensing)
• Current consumption
  typ. 0.7 mA (typically with US)
• Filter time
  250 ms ±2 ms (Test pulse rate > 500 ms)
• Input voltage range "0" signal
  0 V DC ... 5 V DC
• Number of outputs
  4
• Nominal output voltage
  24 V DC (Supply via A1)
• Max. capacitive load
  max. 470 nF
• Error detection time at 1-channel structure
  < 3.5 s (OFF state)
• Response time
  see user manual
• Mounting position
  vertical or horizontal
• Degree of protection
  IP20
• Housing color
  yellow
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Safety Integrity Level Claim Limit (SIL CL)
  3 (2-channel wiring)
• Rated surge voltage/insulation
  Basic insulation 4 kV between all current paths and housing
• Conformance
  CE-compliant
• ECLASS 10.0.1
  27371819
• Width
  22.61 mm
• Max. permissible humidity (storage/transport)
  95 % (non-condensing)
Rated control circuit supply voltage US
24 V DC -20 % / +20 % (external fuse, typically 4 A)
Protective circuit
Inverse-parallel protection against polarity reversal
Input name
Enable inputs
Input voltage range "1" signal
8 V DC ... 28.8 V DC
Output name
O1A, O1B, O2A, O2B
Switching frequency
max. 1/4 x tCycle [Hz]
Test pulses
≤ 220 µs (Test pulse duration)
Output voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Nominal operating mode
100% operating factor
Assembly instructions
Observe derating
Connection method
Screw connection
Screw thread
M3
Rated insulation voltage
250 V AC
Overvoltage category
II
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (operation)
-10 °C ... 55 °C (observe derating)
Designation
Air clearances and creepage distances between the power circuits
Number of inputs
2
Input current range "0" signal
< 1 mA
Protective circuit/component
Suppressor diode
Output voltage when switched off
max. 0.1 V
Ohmic load
min. 50 Ω (Observe limiting continuous current)
Max. inductive load
max. 2.4 mH
Restart time
min. 5 s (Boot time)
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Housing material
Polyamide PA non-reinforced
Stripping length
7 mm
Stop category
0
Shock
10g for Δt = 16 ms (continuous shock, 1000 shocks in each space direction)
ECLASS 9.0
27371819
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Rated control supply current IS
typ. 55 mA (Outputs inactive)
Inrush current
max. 750 mA (Δt  1 s)
Description of the input
IEC 61131-2 type 3
Max. permissible overall conductor resistance
1.2 kΩ (Input and reset circuit at US)
Leakage current
max. 100 µA
Short-circuit protection
Yes (self-limitation at 1.1 A)
Discharging circuit
Yes, internal
Maximum inrush current
1.1 A (Δt = 3 s  at Us)
Cycle time
see user manual
Operating voltage display
1 x green LED
Status display
1 x LED (green), 1 x LED (orange), 1 x LED (blue)
Conductor cross-section AWG
24 ... 12
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Safety Integrity Level (SIL)
2
Standards/regulations
EN 50178
Vibration (operation)
10 Hz ... 150 Hz, 2g
Depth
113.6 mm
Maximum altitude
≤ 2000 m (Above sea level)
Power consumption at US
typ. 1.32 W (Outputs inactive)
Cable length
max. 100 m (per output)
Output description
PNP, IEC 61131-2 type 0.5
Limiting continuous current
100 mA (per channel)
Nominal output voltage range
18 V DC ... 27.6 V DC (US - 1.2 V)
Voltage
24 V DC (via A1)
Nominal voltage range
18.2 V DC ... 27.8 V DC (US - 1 V)
Net weight
159 g
Protection class
III (EN 50178)
Indication
2 x LED (red)
pluggable
Yes
Torque
0.5 Nm ... 0.6 Nm
Performance level (PL)
e (2-channel wiring)
Degree of pollution
2
ECLASS 11.0
27371819