2771007 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  10 mm²
• Insulating material
  PA
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Note
  upper level
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG max.
  12
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Number of connections
  6
• Degree of pollution
  3
• Insulating material group
  I
• Maximum load current
  76 A (with 16 mm² conductor cross section)
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Flammability rating according to UL 94
V0
Nominal current IN
57 A
Maximum load current (upper level)
32 A
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of temperature-rise test
Test passed
Acceleration
30g
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
1.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Color
gray
Maximum power dissipation for nominal condition
1.82 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
10.2 mm
Height NS 35/7,5
73 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Tightening torque max
0.8 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of levels
2
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Nominal current IN (upper level)
24 A
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock duration
18 ms
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
77.5 mm
Height NS 35/15
80.5 mm
Height NS 32
78 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Tightening torque, min
0.5 Nm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Stripping length
8 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410