2771146 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Maximum load current
  32 A (with 4 mm² conductor cross section)
• Finger protection
  guaranteed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 32/NS 35
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  6.2 mm
• Height NS 32
  67 mm
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ECLASS 6.0
  27141100
• ECLASS 9.0
  27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Number of connections
4
Rated surge voltage
6 kV
Insulating material group
I
Back of the hand protection
guaranteed
Bending test turns
135
Setpoint
1 N
Requirements, voltage drop
≤ 3.2 mV
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
67 mm
Height NS 35/15
69.5 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Stripping length
8 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Color
gray
Flammability rating according to UL 94
V0
Connection in acc. with standard
CSA
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Tightening torque, min
0.6 Nm
Screw thread
M3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Number of levels
2
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Tractive force setpoint
60 N
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
62 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Degree of pollution
3
Nominal current IN
32 A
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section tensile test
4 mm²
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque max
0.8 Nm
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410