2771094 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Rated surge voltage
  6 kV
• Nominal current IN
  24 A
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tractive force setpoint
  60 N
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Requirements, voltage drop
  ≤ 3.2 mV
• Result of thermal test
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  67 mm
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Flammability rating according to UL 94
  V0
Overvoltage category
III
Maximum load current
32 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Back of the hand protection
guaranteed
Surge voltage test setpoint
7.3 kV
Bending test turns
135
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
5.2 mm
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Color
blue
Insulating material group
I
Connection in acc. with standard
CSA
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Tight fit on carrier
NS 32/NS 35
Short-time current
0.48 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
69.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Number of levels
2
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 32
67 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Cross section with insertion bridge, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 11
39121410
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.5 mm
Height NS 35/7,5
62 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Stripping length
8 mm
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
2 conductors with same cross section, stranded max.
1.5 mm²
Screw thread
M3
Tightening torque max
0.6 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 21.0
39121410