2866284 Phoenix Contact DC/DC Converters

Product Details

• Efficiency
  > 83 % (at 24 V DC and nominal values)
• Conductor cross section flexible max.
  2.5 mm²
• Stripping length
  7 mm
• Output name
  DC OK active
• Status display
  "DC OK" LED green
• Tightening torque, min
  0.5 Nm
• Rail applications
  EN 50121-4
• Electrostatic discharge
  EN 61000-4-2
• Surge voltage load (surge)
  EN 61000-4-5
• ECLASS 10.0.1
  27210901
• ECLASS 5.1
  27210900
• ETIM 2.0
  EC001039
• UNSPSC 6.01
  30211502
• UNSPSC 11
  39121004
• Inrush current
  < 15 A (typical)
• Nominal output voltage
  24 V DC ±1 %
• Derating
  60 °C ... 70 °C (2.5%/K)
• Output power
  24 W
• Maximum power dissipation in no-load condition
  < 1.2 W
• Assembly instructions
  alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section AWG min.
24
Continuous load current
≤ 20 mA
Standard - Safe isolation
DIN VDE 0100-410
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210900
ECLASS 9.0
27210901
UNSPSC 7.0901
39121004
UNSPSC 20.0
39121041
Width
22.5 mm
Depth
107 mm
Degree of protection
IP20
Input voltage range
10 V DC ... 32 V DC
Mains buffering time
typ. 3 ms (12 V DC)
Nominal output current (IN)
1 A (-25 °C ... 60 °C)
Peak switching voltages nominal load
< 100 mVPP (20 MHz)
Net weight
0.2 kg
Insulation voltage input/output
1.5 kV (type test)
Connection method
Pluggable screw connection
Screw thread
M3
Output voltage
+ 24 V (Signal)
EMC requirements for noise emission
EN 61000-6-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Fast transients (burst)
EN 61000-4-4
ECLASS 11.0
27210901
ECLASS 5.0
27210900
ETIM 3.0
EC001039
ETIM 7.0
EC002046
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Current consumption
2.6 A (12 V DC)
Input fuse
6.3 A (slow-blow, internal)
Connection in parallel
Yes, for assembling redundant systems and increasing efficiency
Connection in series
yes
Power loss nominal load max.
< 5 W
Protection class
III
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Maximum switching voltage
≤ 24 V DC
Tightening torque max
0.6 Nm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL/C-UL listed UL 508
Electromagnetic HF field
EN 61000-4-3
Voltage dips
EN 61000-4-11
ECLASS 4.1
27210900
ECLASS 7.0
27210901
ETIM 4.0
EC000599
UNSPSC 12.01
39121004
UNSPSC 19.0
39121041
UNSPSC 21.0
39121041
Height
99 mm
Installation distance top/bottom
50 mm / 50 mm (≤ 70 °C)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal input voltage range
12 V DC ... 24 V DC
Frequency range DC
0 Hz
Setting range of the output voltage (USet)
22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted)
Residual ripple
< 30 mVPP (20 MHz)
Typical response time
< 0.5 s
Operating voltage display
Green LED
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Output description
UOUT > 21.5 V: High signal
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Shipbuilding approval
DNV GL (EMC A)
Conducted interference
EN 61000-4-6
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27210900
ETIM 6.0
EC002046
UNSPSC 13.2
39121041
UNSPSC 18.0
39121041