2866527 Phoenix Contact Redundancy Modules

Product Details

• Depth
  115 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range
  30 V DC ... 56 V DC
• Derating
  55 °C ... 70 °C (2.5%/K)
• Efficiency
  > 97 %
• Connection method
  Screw connection
• Stripping length
  14 mm
• Standard - Safe isolation
  DIN VDE 0100-410
• UL approvals
  UL/C-UL listed UL 508
• Electromagnetic HF field
  EN 61000-4-3
• Comments
  Criterion A
• Surge voltage load (surge)
  EN 61000-4-5
• Voltage
  10 V (Test Level 3)
• Installation distance top/bottom
  50 mm / 50 mm
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input current
  2x 10 A (-25 °C ... 55 °C)
• Maximum power dissipation in no-load condition
  7 W (IOUT = 10 A)
• Protection class
  III
• Conductor cross section solid max.
  2.5 mm²
• Conductor cross section AWG max.
  14
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
6 kV (Test Level 3)
Test field strength
10 V/m (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27250300
ECLASS 5.1
27371000
UNSPSC 6.01
30211502
UNSPSC 11
39121004
UNSPSC 7.0901
39121004
Installation distance right/left
0 mm / 0 mm
Climatic class
3K3 (in acc. with EN 60721)
Maximum input current
2x 15 A (-25°C ... 40°C)
Housing material
Steel sheet, zinc-plated
Conductor cross section solid min.
0.2 mm²
Screw thread
M2,5
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Frequency range
0.15 MHz ... 80 MHz
Input
2 kV (Test Level 3 - asymmetrical)
Conducted interference
EN 61000-4-6
ECLASS 10.0.1
27371010
ECLASS 11.0
27371010
ECLASS 7.0
27371010
ETIM 3.0
EC001039
ETIM 4.0
EC002540
UNSPSC 18.0
32151504
UNSPSC 19.0
32151504
Height
130 mm
Degree of protection
IP20
Nominal input voltage range
48 V DC
Nominal output current (IN)
20 A (Increasing power)
Connection in series
No
Net weight
0.37 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG min.
24
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Width
32 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Degree of pollution
2
Nominal output voltage
47.3 V DC (Input/output voltage drop of 48 V ... 0.7 V )
Power loss nominal load max.
14 W (IOUT = 20 A)
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Conductor cross section flexible max.
2.5 mm²
EMC requirements for noise emission
EN 61000-6-3
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Electrostatic discharge
EN 61000-4-2
Discharge in air
8 kV (Test Level 3)
Output
2 kV (Test Level 3 - asymmetrical)
I/O/S
asymmetrical
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27250300
ECLASS 6.0
27371000
ETIM 7.0
EC000683
UNSPSC 13.2
39121004
UNSPSC 20.0
32151504
Criterion A
Normal operating behavior within the specified limits.
ECLASS 5.0
27371000
ECLASS 9.0
27371010
ETIM 6.0
EC000683
UNSPSC 12.01
39121004
UNSPSC 21.0
32151504