2866640 Phoenix Contact UPS (DC)

Product Details

• Width
  67.5 mm
• Installation distance top/bottom
  30 mm / 30 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Buffer time
  Can be set to: 0.5 min; 1 min; 2 min; 3 min; 5 min; 10 min; 15 min; 20 min; 30 min; permanent
• Typical response time
  100 ms
• Derating
  60 °C ... 70 °C (2.5%/K)
• Max. capacitive load
  unlimited
• Residual ripple
  < 50 mVPP
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Degree of pollution
  2
• Protective circuit
  Varistor
• Nominal output current (IN)
  2 A
• Efficiency
  > 83 %
• Height
  99 mm
• Max. permissible relative humidity (operation)
  95 % (at 25 °C, non-condensing)
• Current consumption
  0.85 A (230 V AC)
• Mains buffering time
  see diagram
• Setting range of the output voltage (USet)
  22.5 V DC ... 29.5 V DC (normal mode; in the buffer mode, dependent on a battery voltage of 27.9 V DC ... 19.2 V DC)
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
IQ technology
no
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL Listed UL 508
Fast transients (burst)
EN 61000-4-4
ECLASS 10.0.1
27040705
ECLASS 4.0
27040600
ECLASS 9.0
27040705
UNSPSC 6.01
30211510
Degree of protection
IP20
Inrush current limiting/I²t
< 1.1 A2s
Input fuse, integrated
3.15 A (slow-blow, internal)
Power loss nominal load max.
15 W
Memory medium
External, battery 0.8 Ah / 1.3 Ah
Connection method
Pluggable COMBICON screw connections
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-4
Conducted interference
EN 61000-4-6
ECLASS 4.1
27040600
ECLASS 5.0
27040600
ETIM 3.0
EC000382
ETIM 6.0
EC000382
ETIM 7.0
EC000382
UNSPSC 13.2
39121011
UNSPSC 21.0
39121011
Depth
107 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range DC
100 V DC ... 350 V DC
Power factor (cos phi)
approx. 0.5
Nominal output voltage
24 V DC
Output current limit
max. 3 A
Maximum power dissipation in no-load condition
3.8 W
Connection in parallel
yes
Protection class
II (in closed control cabinet)
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
2.5 mm²
Stripping length
8 mm
EMC requirements for noise immunity
EN 61000-6-1
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Voltage dips
EN 61000-4-11
ECLASS 11.0
27040705
ECLASS 7.0
27040603
ETIM 2.0
EC000382
UNSPSC 11
39121011
UNSPSC 18.0
39121011
Peak switching voltages nominal load
< 100 mVPP
Insulation voltage input/output
4 kV (type test)
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Screw thread
M3
Standard - Safe isolation
DIN VDE 0100-410
Electrostatic discharge
EN 61000-4-2
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27040600
ETIM 4.0
EC000382
UNSPSC 12.01
39121011
UNSPSC 20.0
39121011
Surge protection against internal surge voltages
< 35 V DC
Feedback voltage resistance
35 V DC
Net weight
0.45 kg
MTBF (IEC 61709, SN 29500)
> 753000 h (40 °C)
Conductor cross section AWG min.
24
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Surge voltage load (surge)
EN 61000-4-5
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27040600
UNSPSC 7.0901
39121011
UNSPSC 19.0
39121011