2902014 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Width
  6.2 mm
• Maximum altitude
  ≤ 2000 m
• Input resistance current input
  approx. 68 Ω (+0.7 V for test diode)
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Transmission Behavior
  1:1 to input signal
• Conductor cross section solid
  0.2 mm² ... 1.5 mm² (with ferrule)
• No. of channels
  1
• Limit frequency (3 dB)
  approx. 1.75 kHz
• Ripple
  < 20 mVPP (at 600 Ω)
• Power consumption
  ≤ 1400 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Maximum transmission error
  0.05 % (of final value in repeater power supply operation)
• Torque
  0.5 Nm ... 0.6 Nm
• ECLASS 6.0
  27210100
• ECLASS 9.0
  27210120
• UNSPSC 6.01
  30211506
• UNSPSC 20.0
  39121008
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Height
  109.81 mm
Number of inputs
1
Max. output current
24 mA
Nominal supply voltage
24 V DC
Stripping length
10 mm
ECLASS 4.0
27210100
ECLASS 7.0
27210120
UNSPSC 7.0901
39121008
UNSPSC 12.01
39121008
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Description of the input
Current input (sensor circuit)
Screw thread
M3
Transmitter supply voltage
> 19.5 V
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Maximum temperature coefficient
0.0075 %/K
Overvoltage category
II
Output name
Current output
Typical current consumption
25 mA (at 24 V DC and in isolator operation)
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Certificate
DNV GL TAA00002UA
Noise emission
EN 61000-6-4
Electromagnetic compatibility
Conformance with EMC directive
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Designation
Shipbuilding approval
EMC
A
Rated insulation voltage
300 V (effective)
Housing material
PBT
Temperature
B
Humidity
B
ECLASS 10.0.1
27210120
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Identification
UL 508 Listed
Vibration
A
Conductor cross section AWG
24 ... 12 (flexible)
Standards/regulations
EN 61000-4-6
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Ambient temperature (operation)
-40 °C ... 70 °C
Degree of protection
IP20 (not assessed by UL)
Current input signal
4 mA ... 20 mA (repeater power supply and isolator operation)
Connection method
Screw connection
Temperature coefficient, typical
0.0075 %/K
Protective circuit
Transient protection
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27210100
ETIM 4.0
EC002653
ETIM 7.0
EC002653
UNSPSC 11
39121008
Current output signal
4 mA ... 20 mA (repeater power supply and isolator operation)
Degree of pollution
2
ECLASS 11.0
27210120
ECLASS 5.0
27210100
UNSPSC 18.0
39121008
UNSPSC 21.0
39121008
Number of outputs
1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
UNSPSC 13.2
39121008
UNSPSC 19.0
39121008
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27210100
Step response (10-90%)
< 200 µs (typ.)
Mounting position
any
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ETIM 6.0
EC002653