2902998 Phoenix Contact AC/DC Power Supplies

Product Details

• Depth
  84 mm
• Stripping length
  8 mm
• Mains variation/undervoltage
  EN 61000-4-11
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Electromagnetic HF field
  EN 61000-4-3
• Input
  2 kV (Test Level 3 - symmetrical)
• Voltage
  10 V (Test Level 3)
• ECLASS 10.0.1
  27040701
• ECLASS 4.1
  27040700
• ETIM 6.0
  EC002540
• ETIM 4.0
  EC000599
• UNSPSC 20.0
  39121004
• Width
  22.5 mm
• Installation distance right/left
  0 mm / 0 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Input voltage range
  85 V AC ... 264 V AC
• EMC requirements for noise immunity
  EN 61000-6-1
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Comments
Criterion A
Voltage dips
EN 61000-4-11
ECLASS 4.0
27040700
ECLASS 6.0
27049000
Height
90 mm
Degree of protection
IP20
Ambient temperature (start-up type tested)
-25 °C
Climatic class
3K3 (in acc. with EN 60721)
Current consumption
0.8 A (100 V AC)
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Mains buffering time
> 20 ms (120 V AC)
Input fuse
2 A (slow-blow, internal)
Installation distance top/bottom
30 mm / 30 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage range
100 V AC ... 240 V AC
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Nominal power consumption
71.7 VA
Inrush current
< 25 A (typical)
Power factor (cos phi)
0.48
Type of protection
Transient surge protection
Feedback voltage resistance
< 25 V DC
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Protection against overvoltage at the output (OVP)
≤ 25 V DC
MTBF (IEC 61709, SN 29500)
> 953000 h (40 °C)
Net weight
0.15 kg
Protection class
II (in closed control cabinet)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG min.
24
Screw thread
M3
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m
Conducted interference
EN 61000-4-6
Criterion A
Normal operating behavior within the specified limits.
ECLASS 5.0
27049000
ECLASS 9.0
27040701
UNSPSC 7.0901
39121004
Housing material
Polycarbonate
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
2.5 mm²
Standard - Safety of transformers
EN 61558-2-16
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Frequency range
10 kHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Surge voltage load (surge)
EN 61000-4-5
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.1
27049000
ECLASS 7.0
27049002
UNSPSC 11
39121004
UNSPSC 19.0
39121004
Nominal output voltage
12 V DC ±1 %
Nominal output current (IN)
2.5 A (-25 °C ... 55 °C)
Residual ripple
< 30 mVPP (with nominal values)
Typical response time
< 1 s
Output power
30 W
Insulation voltage input/output
4 kV AC (type test)
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
14
EMC requirements for noise emission
EN 61000-6-3
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL/C-UL listed UL 508
Contact discharge
6 kV (Test Level 3)
Output
1 kV (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040701
ETIM 3.0
EC001039
UNSPSC 6.01
30211502
UNSPSC 13.2
39121004
UNSPSC 21.0
39121004
ETIM 7.0
EC002540
UNSPSC 18.0
39121004
UNSPSC 12.01
39121004
Connection in series
yes
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Connection in parallel
Yes, for redundancy and increased capacity
Degree of pollution
2
Protective circuit/component
Varistor
Power loss nominal load max.
< 4.6 W
Conductor cross section flexible min.
0.2 mm²
Foot latch material
POM (Polyoxymethylen)
Derating
55 °C ... 70 °C (2.5%/K)
Maximum power dissipation in no-load condition
< 0.3 W
Efficiency
typ. 86 % (120 V AC)
Connection method
Screw connection