2902040 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902040
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 3
Dec 22, 2024
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, standard c
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902040 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 119.2 mm
- Number of inputs 1
- Max. input current 24 mA
- Voltage output signal 0 V ... 5 V (via DIP switch)
- No. of channels 1
- Protective circuit Transient protection
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Number of outputs 1
- Max. output current 22 mA
- Ripple < 20 mVPP (at 600 Ω)
- Power consumption ≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Conductor cross section AWG 24 ... 12 (flexible)
- Height 109.81 mm
- Input resistance current input approx. 63 Ω (+0.7 V for test diode)
- Current output signal 0 mA ... 20 mA (via DIP switch)
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Typical current consumption 25 mA (Current output, at 24 V DC incl. load)
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Temperature coefficient, typical 0.01 %/K
- Overvoltage category II
- ECLASS 5.0 27210100
- UNSPSC 6.01 30211502
- UNSPSC 18.0 39121008
- max. input voltage 33 V
- Nominal supply voltage 24 V DC
- Stripping length 10 mm
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- Step response (10-90%) < 8.5 ms (with 30 Hz filter)
- EMC A
- ECLASS 4.0 27210100
- ECLASS 7.0 27210120
- ETIM 6.0 EC002653
- UNSPSC 20.0 39121008
- Ambient temperature (operation) -40 °C ... 70 °C
- Voltage input signal 0 V ... 5 V (via DIP switch)
- Input resistance of voltage input > 1000 kΩ
- Short-circuit current < 32 mA
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Limit frequency (3 dB) 30 Hz (via DIP switch)
- Degree of pollution 2
- Housing material PBT
- Designation Shipbuilding approval
- Temperature B
- ECLASS 10.0.1 27210120
- ECLASS 6.0 27210100
- UNSPSC 11 39121004
- UNSPSC 21.0 39121008
- Maximum temperature coefficient 0.01 %/K
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Rated insulation voltage 300 V (effective)
- Noise emission EN 61000-6-4
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Certificate DNV GL TAA00002UA
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 5.1 27210100
- ETIM 4.0 EC002653
- UNSPSC 7.0901 39121004
- UNSPSC 13.2 39121008
- UNSPSC 19.0 39121008
- Electromagnetic compatibility Conformance with EMC directive
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Mounting position any
- Identification UL 508 Listed
- Standards/regulations EN 61000-4-6
- Humidity B
- ECLASS 11.0 27210120
- ECLASS 4.1 27210100
- ECLASS 9.0 27210120
- ETIM 7.0 EC002653
- UNSPSC 12.01 39121004
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Connection method Push-in connection
- Width 6.2 mm
- Current input signal 0 mA ... 20 mA (via DIP switch)
- Degree of protection IP20 (not assessed by UL)
- Maximum transmission error ≤ 0.1 % (of final value)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Configurable/programmable Yes
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Load/output load voltage output ≥ 10 kΩ
- Vibration A
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- China RoHS Environmentally Friendly Use Period = 50 years
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Color gray
- REACh SVHC Lead 7439-92-1
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$290.57
Stock:
3
Select Qty:
$290.57
$290.57 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
