2986588 Phoenix Contact Electrical Safety Devices
Part#:2986588
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Safe coupling relay for SIL 2 high and low demand applications, coupled digital output signals to the I/O, 2 enabling current paths, 1 signal contact, module for safe state off applications, integrated test pulse filter, width: 17.5 mm, pluggable Push-in
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2986588 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 114.5 mm
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Inrush current max. 100 mA
- Maximum switching frequency 0.5 Hz
- Minimum switching voltage 15 V AC/DC (N/O contact / N/C contact)
- Switching capacity min. 75 mW
- Net weight 137.7 g
- Housing material PBT
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Stop category 0
- Performance level (PL) c (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90 %)
- Width 17.5 mm
- Input voltage range 20.4 V DC ... 26.4 V DC
- Recovery time 1 s
- Contact type 2 enabling current paths
- Limiting continuous current 5 A (N/O contact, pay attention to the derating)
- Maximum inrush current 5 A (N/O contact)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Nominal operating mode 100% operating factor
- Connection method Push-in connection
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Standards/regulations DIN EN 50178/VDE 0160
- Overvoltage category III
- Conformance CE-compliant
- ECLASS 11.0 27371819
- ECLASS 6.0 27371800
- ETIM 3.0 EC001449
- UNSPSC 6.01 30211901
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122205
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Rated control supply current IS typ. 55 mA
- Typical release time 50 ms
- Operating voltage display 1 x yellow LED
- Inrush current, minimum 5 mA (N/O contact / N/C contact)
- Interrupting rating (ohmic load) max. 120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
- Maximum interrupting rating (inductive load) 72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
- Housing color yellow
- Conductor cross-section AWG 24 ... 16
- Safety Integrity Level (SIL) 2
- Safety Integrity Level Claim Limit (SIL CL) 1 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
- Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (31/32), (13/14, 23/24)
- Shock 15g
- ECLASS 10.0.1 27371819
- ECLASS 5.1 27371900
- ECLASS 7.0 27371819
- UNSPSC 7.0901 39121501
- ETIM 6.0 EC001449
- UNSPSC 11 39121501
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Typ. starting time with Us 50 ms
- Protective circuit Surge protection Suppressor diode, 33 V (A1 - A2)
- Maximum switching voltage 250 V AC/DC (N/O contact / N/C contact, observe the load curve)
- Mechanical service life 10x 106 cycles
- Mounting type DIN rail mounting
- Min. degree of protection of inst. location IP54
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Category 1 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90 %)
- Rated insulation voltage 250 V AC
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 4.0 40020600
- ECLASS 4.1 40020600
- ETIM 2.0 EC001449
- ETIM 4.0 EC001449
- UNSPSC 18.0 39122205
- UNSPSC 21.0 39122205
- Height 112 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Maximum altitude ≤ 2000 m (Above sea level)
- Power consumption at US typ. 1.32 W
- Filter time max. 5 ms (at A1 in the event of voltage dips at Us)
- Contact material AgCuNi, + 0.2 µm Au
- Sq. Total current 50 A2 (observe derating)
- Output fuse 10 A gL/gG (N/O contact)
- Mounting position any
- Degree of protection IP20
- pluggable Yes
- Stripping length 8 mm
- Designation Air clearances and creepage distances between the power circuits
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27371900
- ECLASS 9.0 27371819
- ETIM 7.0 EC001449
- UNSPSC 13.2 39121501
- UNSPSC 20.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
