2986957 Phoenix Contact Electrical Safety Devices
Part#:2986957
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 56
Dec 22, 2024
Safe coupling relay for SIL 3 high and low demand applications, coupled digital output signals to the I/O, 2 enabling current paths, 1 signal contact, module for safe state off applications, integrated test pulse filter, width: 17.5 mm, pluggable Push-in
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2986957 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 17.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Maximum altitude ≤ 2000 m (Above sea level)
- Typ. starting time with Us 50 ms
- Maximum switching frequency 0.5 Hz
- Minimum switching voltage 15 V AC/DC (N/O contact / N/C contact)
- Maximum interrupting rating (inductive load) 72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Net weight 137.48 g
- Min. degree of protection of inst. location IP54
- Conductor cross-section AWG 24 ... 16
- Designation Air clearances and creepage distances between the power circuits
- Standards/regulations DIN EN 50178/VDE 0160
- Shock 15g
- ECLASS 11.0 27371819
- ECLASS 5.1 27371900
- ECLASS 7.0 27371819
- ETIM 6.0 EC001449
- UNSPSC 13.2 39121501
- UNSPSC 21.0 39122205
- Depth 114.5 mm
- Recovery time 1 s
- Contact type 2 enabling current paths
- Sq. Total current 50 A2 (observe derating)
- Mechanical service life 10x 106 cycles
- pluggable Yes
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Stripping length 8 mm
- Performance level (PL) e (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
- Degree of pollution 2
- ECLASS 10.0.1 27371819
- ECLASS 6.0 27371800
- ETIM 7.0 EC001449
- UNSPSC 12.01 39121501
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Input voltage range 20.4 V DC ... 26.4 V DC
- Inrush current max. 100 mA
- Operating voltage display 1 x yellow LED
- Filter time max. 5 ms (at A1 in the event of voltage dips at Us)
- Maximum inrush current 5 A (N/O contact)
- Inrush current, minimum 5 mA (N/O contact / N/C contact)
- Nominal operating mode 100% operating factor
- Mounting position any
- Connection method Push-in connection
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Safety Integrity Level (SIL) 3
- Safety Integrity Level Claim Limit (SIL CL) 3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
- Conformance CE-compliant
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ECLASS 9.0 27371819
- UNSPSC 6.01 30211901
- UNSPSC 7.0901 39121501
- Height 112 mm
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Power consumption at US typ. 1.32 W
- Typical release time 50 ms
- Maximum switching voltage 250 V AC/DC (N/O contact / N/C contact, observe the load curve)
- Contact material AgCuNi, + 0.2 µm Au
- Switching capacity min. 75 mW
- Output fuse 10 A gL/gG (N/O contact)
- Mounting type DIN rail mounting
- Housing color yellow
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Category 4 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
- Rated surge voltage/insulation Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (31/32), (13/14, 23/24)
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27371900
- ETIM 2.0 EC001449
- ETIM 4.0 EC001449
- UNSPSC 18.0 39122205
- UNSPSC 19.0 39122205
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Rated control supply current IS typ. 55 mA
- Protective circuit Surge protection Suppressor diode, 33 V (A1 - A2)
- Limiting continuous current 5 A (N/O contact, pay attention to the derating)
- Interrupting rating (ohmic load) max. 120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
- Degree of protection IP20
- Housing material PBT
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stop category 0
- Rated insulation voltage 250 V
- Overvoltage category III
- ECLASS 4.1 40020600
- ETIM 3.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 20.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$282.73
Stock:
56
Select Qty:
$282.73
$282.73 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
