3001501 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 5.0
  27141100
• Conductor cross section AWG min.
  24
• Cross section with insertion bridge, stranded max.
  2.5 mm²
• ECLASS 7.0
  27141120
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Cross section with insertion bridge, solid max.
  4 mm²
• ECLASS 4.0
  27141100
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Overvoltage category
  III
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Height NS 35/7,5
  47 mm
• Maximum power dissipation for nominal condition
  0.77 W
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Tight fit on carrier
  NS 32/NS 35
Nominal current IN
24 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Tightening torque max
0.8 Nm
Conductor cross section solid max.
4 mm²
Nominal voltage UN
800 V
Surge voltage test setpoint
9.6 kV
Setpoint
1 N
Result of voltage-drop test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Proof of thermal characteristics (needle flame) effective duration
30 s
End cover width
1.8 mm
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Acceleration
30g
Width
5.2 mm
Height NS 35/15
54.5 mm
Screw thread
M3
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
12
Open side panel
Yes
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock test result
Test passed
Length
42.5 mm
Tightening torque, min
0.6 Nm
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
Color
gray
Number of shocks per direction
3
UNSPSC 7.0901
39121410
Number of levels
1
Degree of pollution
3
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Shock form
Half-sine
2 conductors with same cross section, solid min.
0.2 mm²
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Potentials
1
Flammability rating according to UL 94
V0
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
2 kV
Number of connections
2
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Insulating material
PA
Insulating material group
I
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Maximum load current
32 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Conductor cross section solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Max. AWG conductor cross section, flexible
14
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 7.0
EC000897
Connection method
Screw connection
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 2.0
EC000897
ECLASS 4.1
27141100
Height NS 32
52 mm
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
Stripping length
8 mm
Conductor cross section flexible min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897