3001679 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Overvoltage category
  III
• Insulating material group
  I
• Maximum load current
  16 A (in case of a 1.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Conductor cross section tensile test
  1.5 mm²
• Result of temperature-rise test
  Test passed
• Nominal cross section
  1.5 mm²
• Rated surge voltage
  4 kV
• Nominal current IN
  16 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 15
• Requirements, voltage drop
  ≤ 3.2 mV
• Number of connections
  4
• Degree of pollution
  3
• Open side panel
  Yes
• Surge voltage test setpoint
  4.8 kV
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
4.2 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
0.5 mm²
Tightening torque, min
0.22 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Number of levels
2
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
400 V
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tractive force setpoint
40 N
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
33.5 mm
Conductor cross section AWG max.
16
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Insulating material
PA
Connection in acc. with standard
CSA
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Setpoint
1 N
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.34 mm²
Internal cylindrical gage
A1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Result of thermal test
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 15
30 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
0.5 mm²
Stripping length
6 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
1 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Screw thread
M2
Tightening torque max
0.25 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410