3001514 Phoenix Contact Terminal Blocks

Product Details

• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  42.5 mm
• Insulating material group
  I
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Overvoltage category
  III
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Result of voltage-drop test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Height NS 32
  52 mm
• Color
  blue
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Result of thermal test
  Test passed
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
5.2 mm
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Stripping length
8 mm
Nominal current IN
24 A
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Maximum power dissipation for nominal condition
0.77 W
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tensile test result
Test passed
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Proof of thermal characteristics (needle flame) effective duration
30 s
Potentials
1
Flammability rating according to UL 94
V0
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Open side panel
Yes
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
47 mm
Connection in acc. with standard
CSA
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, solid max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Rated surge voltage
8 kV
Maximum load current
32 A (with 4 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
54.5 mm
Screw thread
M3
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Number of levels
1
Insulating material
PA
Power frequency withstand voltage setpoint
2 kV
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
1.8 mm
Conductor cross section solid min.
0.2 mm²
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Number of connections
2
Degree of pollution
3
Finger protection
guaranteed
Bending test turns
135
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Connection method
Screw connection
Conductor cross section AWG min.
24
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
Permissible humidity (storage/transport)
30 % ... 70 %