3004265 Phoenix Contact Terminal Blocks

Product Details

• Screw thread
  M4
• Note
  For terminal marking, please use marking material with 10.2 mm pitch.
• Number of levels
  1
• Degree of pollution
  3
• Maximum power dissipation
  max. 2.5 W (with single arrangement of the fuse terminal block in the event of overload)
• Nominal current IN
  10 A
• Number of positions
  1
• Result of tight fit on support
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Result of flexion and pull-out test
  Test passed
• Result of thermal test
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Internal cylindrical gage
  B6
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Maximum load current
  10 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
Contact resistance
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of temperature-rise test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
2 conductors with same cross section, solid max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection method
Screw connection
Color
black
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
2.43 W
Connection in acc. with standard
CSA
Open side panel
No
Fuse type
Glass / ceramics / ...
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
68 mm
Height NS 35/7,5
60.5 mm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
4 mm²
Tightening torque, min
1.2 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Nominal cross section
16 mm²
Insulating material
PA
Rated operating voltage
500 V
Overvoltage category
III
Fuse
G / 6,3 x 32
Nominal voltage UN
24 V
Back of the hand protection
guaranteed
Surge voltage test setpoint
7.3 kV
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Bending test rotation speed
10 rpm
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
79 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
10.2 mm
Height NS 32
65.5 mm
Conductor cross section solid max.
16 mm²
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Cross section with insertion bridge, stranded max.
10 mm²
Cross section with insertion bridge, solid max.
10 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Stripping length
12 mm
Tightening torque max
1.5 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 4.0
27141100
ECLASS 6.0
27141100
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141116
ECLASS 10.0.1
27141116
ECLASS 7.0
27141116
ECLASS 9.0
27141116
UNSPSC 6.01
30211811
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 4.1
27141100
ETIM 3.0
EC000899
ETIM 7.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
ETIM 4.0
EC000899