3006043 Phoenix Contact Terminal Blocks

Product Details

• Bending test conductor cross section/weight
  2.5 mm² / 0.7 kg
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.75 mm²
• Overvoltage category
  III
• Open side panel
  Yes
• Tight fit on carrier
  NS 32/NS 35
• Color
  gray
• Nominal current IN
  76 A
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Shock duration
  30 ms
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Height NS 35/7,5
  54 mm
• Note
  Terminal point
• Conductor cross section flexible max.
  16 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  16 mm²
• Cross section with insertion bridge, stranded max.
  16 mm²
• ECLASS 7.0
  27141120
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Max. AWG conductor cross section, flexible
6
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Acceleration
5g
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque, min
1.5 Nm
Conductor cross section AWG max.
4
ECLASS 5.0
27141100
2 conductors with same cross section, stranded max.
4 mm²
Flammability rating according to UL 94
V0
Shock protection test specification
IEC 60529:2001-02
Power frequency withstand voltage setpoint
2 kV
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 1, class B, body mounted
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section solid max.
25 mm²
Conductor cross section AWG min.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Cross section with insertion bridge, solid max.
16 mm²
ECLASS 4.0
27141100
Potentials
1
Rated surge voltage
8 kV
Nominal voltage UN
800 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Setpoint
10 N
Short circuit stability result
Test passed
Conductor cross section short circuit testing
25 mm²
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
42.5 mm
Width
12.2 mm
Stripping length
11 mm
Tightening torque max
1.8 Nm
Conductor cross section flexible min.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Screw thread
M4
Connection in acc. with standard
CSA
Conductor cross section solid min.
2.5 mm²
Min. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid max.
6 mm²
Internal cylindrical gage
B7
Number of levels
1
Insulating material
PA
Short-time current
3 kA
Maximum power dissipation for nominal condition
2.43 W
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/15
61.5 mm
2 conductors with same cross section, stranded min.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
Number of connections
2
Degree of pollution
3
Insulating material group
I
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
Nominal cross section
16 mm²
Maximum load current
101 A (with 25 mm² conductor cross section)
Back of the hand protection
guaranteed
Height NS 32
59 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
ECLASS 10.0.1
27141120
Result of power-frequency withstand voltage test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
UNSPSC 6.01
30211811
UNSPSC 11
39121410
End cover width
1.5 mm
ETIM 4.0
EC000897
ETIM 2.0
EC000897
UNSPSC 18.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 12.01
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 21.0
39121410