3006302 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Nominal voltage UN
  800 V
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.75 mm² / 0.4 kg
• Conductor cross section tensile test
  35 mm²
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Width
  15.2 mm
• Note
  Terminal point
• Conductor cross section flexible max.
  35 mm²
• 2 conductors with same cross section, solid max.
  10 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.75 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ETIM 4.0
  EC000897
ETIM 7.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Color
blue
Maximum power dissipation for nominal condition
4.06 W
Nominal current IN
125 A
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2 kV
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
51 mm
Conductor cross section AWG min.
18
Conductor cross section AWG max.
2
2 conductors with same cross section, stranded max.
10 mm²
Screw thread
M6
Tightening torque, min
3.2 Nm
ECLASS 11.0
27141125
ECLASS 7.0
27141125
ETIM 6.0
EC001329
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Nominal cross section
35 mm²
Maximum load current
125 A (with 35 mm² conductor cross section)
Degree of pollution
3
Connection in acc. with standard
CUL
Shock protection test specification
IEC 60529:2001-02
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
190 N
Result of thermal test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
55 mm
Height NS 32
56 mm
Conductor cross section flexible min.
0.75 mm²
2 conductors with same cross section, solid min.
0.75 mm²
2 conductors with same cross section, stranded min.
0.75 mm²
Connection method
Screw connection
Tightening torque max
3.7 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Insulating material
PA
Rated surge voltage
8 kV
Back of the hand protection
guaranteed
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Setpoint
10 N
Requirements, voltage drop
≤ 3.2 mV
Short-time current
4.2 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
58.5 mm
Conductor cross section solid min.
0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.75 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141125
UNSPSC 18.0
39121410
Number of levels
1
Insulating material group
I
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
35 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid max.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.75 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Stripping length
16 mm
ECLASS 10.0.1
27141125
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410