3006153 Phoenix Contact Terminal Blocks
Part#:3006153
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Installation terminal block, Screw connection, cross section: 2.5 mm² - 25 mm², AWG: 12 - 4, width: 12.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3006153 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Nominal cross section 16 mm²
- Degree of pollution 3
- Connection in acc. with standard CSA
- Open side panel Yes
- Result of power-frequency withstand voltage test Test passed
- Bending test rotation speed 10 rpm
- Conductor cross section tensile test 25 mm²
- Short-time current 1.92 kA
- Acceleration 30g
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Number of connections 2
- Rated surge voltage 6 kV
- Maximum power dissipation for nominal condition 2.43 W
- Back of the hand protection guaranteed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tensile test result Test passed
- Short circuit stability result Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock form Half-sine
- Shock duration 18 ms
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Height NS 35/15 54.5 mm
- Note Terminal point
- Conductor cross section flexible, with ferrule without plastic sleeve max. 16 mm²
- 2 conductors with same cross section, solid max. 6 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 4 mm²
- Screw thread M4
- Tightening torque max 1.8 Nm
- ECLASS 11.0 27141125
- ECLASS 4.1 27141100
- ETIM 3.0 EC000897
- ETIM 6.0 EC001329
- UNSPSC 11 39121410
- UNSPSC 12.01 39121410
- Color gray
- Insulating material group I
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Power frequency withstand voltage setpoint 1.89 kV
- Bending test conductor cross section/weight 2.5 mm² / 0.7 kg
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Test duration per axis 5 h
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Length 42.5 mm
- Conductor cross section solid max. 25 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 16 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 1.5 mm²
- Stripping length 11 mm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 5.0 27141100
- ETIM 2.0 EC000897
- ETIM 7.0 EC001329
- UNSPSC 21.0 39121410
- Number of levels 1
- Insulating material PA
- Maximum load current 101 A (with 25 mm² conductor cross section)
- Nominal voltage UN 400 V
- Finger protection guaranteed
- Result of flexion and pull-out test Test passed
- Tractive force setpoint 135 N
- Result of thermal test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- ASD level 6.12 (m/s2)2/Hz
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 32 52 mm
- Conductor cross section AWG max. 4
- 2 conductors with same cross section, stranded max. 6 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.75 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 10 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 10.0.1 27141125
- ECLASS 5.1 27141100
- ECLASS 9.0 27141125
- UNSPSC 19.0 39121410
- UNSPSC 20.0 39121410
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Nominal current IN 76 A
- Result of surge voltage test Test passed
- Bending test turns 135
- Tight fit on carrier NS 32/NS 35
- Conductor cross section short circuit testing 16 mm²
- Test spectrum Service life test category 2, bogie-mounted
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/7,5 47 mm
- Conductor cross section solid min. 2.5 mm²
- Conductor cross section flexible max. 16 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 1.5 mm²
- 2 conductors with same cross section, solid min. 1.5 mm²
- 2 conductors with same cross section, stranded min. 1.5 mm²
- Tightening torque, min 1.5 Nm
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- Width 12.2 mm
- End cover width 1.8 mm
- Conductor cross section flexible min. 4 mm²
- Conductor cross section AWG min. 12
- Conductor cross section flexible, with ferrule with plastic sleeve min. 1.5 mm²
- Connection method Screw connection
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 7.0 27141125
- ETIM 4.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 13.2 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨