Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

3035288 Phoenix Contact Terminal Blocks

Phoenix Contact 3035288 Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, connection method: Spring-cage connection, number of connections: 3, cross section: 0.2 mm² - 16 mm², AWG: 24 - 6, width: 10.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Phoenix Contact

Part#:3035288

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 1202

Dec 23, 2024

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, connection method: Spring-cage connection, number of connections: 3, cross section: 0.2 mm² - 16 mm², AWG: 24 - 6, width: 10.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 3035288 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Open side panel
    Yes
  • Surge voltage test setpoint
    9.8 kV
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Result of surge voltage test
    Test passed
  • Result of flexion and pull-out test
    Test passed
  • Result of voltage-drop test
    Test passed
  • Tight fit on carrier
    NS 35
  • Conductor cross section short circuit testing
    10 mm²
  • Oscillation, broadband noise test result
    Test passed
  • ASD level
    6.12 (m/s2)2/Hz
  • Test spectrum
    Service life test category 2, bogie-mounted
  • Acceleration
    30g
  • Shock test result
    Test passed
  • Potentials
    1
  • Shock protection test specification
    DIN EN 50274 (VDE 0660-514):2002-11
  • Bending test turns
    135
  • Result of tight fit on support
    Test passed
  • Setpoint
    5 N
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Result of aging test
    Test passed
  • Result of thermal test
    Test passed
  • Test duration per axis
    5 h
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    130 °C
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    28 MJ/kg
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • End cover width
    2.2 mm
  • Length
    95.4 mm
  • Height NS 35/7,5
    50.3 mm
  • Stripping length
    18 mm
  • Connection method
    Spring-cage connection
  • Conductor cross section solid min.
    0.2 mm²
  • Conductor cross section flexible min.
    0.2 mm²
  • Min. AWG conductor cross section, flexible
    24
  • Max. AWG conductor cross section, flexible
    8
  • Back of the hand protection
    guaranteed
  • Result of power-frequency withstand voltage test
    Test passed
  • ECLASS 11.0
    27141120
  • ECLASS 5.0
    27141100
  • ECLASS 5.1
    27141100
  • ETIM 3.0
    EC000897
  • UNSPSC 12.01
    39121410
  • UNSPSC 6.01
    30211811
  • UNSPSC 13.2
    39121410
  • Power frequency withstand voltage setpoint
    2.2 kV
  • Bending test conductor cross section/weight
    0.2 mm² / 0.2 kg
  • Tensile test result
    Test passed
  • Result of temperature-rise test
    Test passed
  • Short circuit stability result
    Test passed
  • Short-time current
    1.2 kA
  • Ageing test for screwless modular terminal block temperature cycles
    192
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2008-03
  • Test frequency
    f1 = 5 Hz to f2 = 250 Hz
  • Test specification, shock test
    DIN EN 50155 (VDE 0115-200):2008-03
  • Shock duration
    18 ms
  • Shock form
    Half-sine
  • UNSPSC 7.0901
    39121410
  • UNSPSC 19.0
    39121410
  • UNSPSC 21.0
    39121410
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Height NS 35/15
    57.8 mm
  • Connection
    1 level
  • Connection in acc. with standard
    UL
  • Conductor cross section AWG min.
    24
  • Conductor cross section flexible max.
    10 mm²
  • Conductor cross section solid max.
    16 mm²
  • Conductor cross section AWG max.
    6
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    0.25 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    10 mm²
  • Internal cylindrical gage
    A6
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • China RoHS
    Environmentally friendly use period: unlimited = EFUP-e
  • ECLASS 4.1
    27141100
  • ECLASS 9.0
    27141120
  • ETIM 2.0
    EC000897
  • ECLASS 7.0
    27141120
  • UNSPSC 11
    39121410
  • UNSPSC 18.0
    39121410
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    2.5 mm²
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ECLASS 4.0
    27141100
  • ECLASS 10.0.1
    27141120
  • ECLASS 6.0
    27141100
  • ETIM 6.0
    EC000897
  • ETIM 7.0
    EC000897
  • ETIM 4.0
    EC000897
  • UNSPSC 20.0
    39121410
  • Number of levels
    1
  • Flammability rating according to UL 94
    V0
  • Degree of pollution
    3
  • Maximum load current
    57 A
  • Note
    The max. load current must not be exceeded by the total current of all connected conductors.
  • Area of application
    Railway industry
  • Maximum power dissipation for nominal condition
    1.82 W
  • Nominal current IN
    57 A (with 16 mm² conductor cross section)
  • Number of shocks per direction
    3
  • Nominal cross section
    10 mm²
  • Insulating material
    PA
  • Rated surge voltage
    8 kV
  • Insulating material group
    I
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Width
    10.2 mm
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
    1.5 mm²
  • Bending test rotation speed
    10 rpm
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • Static insulating material application in cold
    -60 °C
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    0.25 mm²
  • Number of connections
    3
  • Color
    gray
  • Overvoltage category
    III
  • Nominal voltage UN
    1000 V
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    10 mm²

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$8.34

Stock:

1,202

Select Qty:

$8.34

$8.34 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo