3035698 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Result of power-frequency withstand voltage test
  Test passed
• Number of levels
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.31 W
• Maximum load current
  5 A (with 10 mm² conductor cross section)
• Nominal cross section
  6 mm²
• Rated surge voltage
  6 kV
• Nominal voltage UN
  1000 V
• Result of surge voltage test
  Test passed
• Setpoint
  5 N
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Result of thermal test
  Test passed
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
End cover width
2.2 mm
Note
If several diode terminal blocks need adding to the DIN rail, a spacer plate must be placed between them.
Color
gray
Insulating material group
I
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
100.8 mm
Height NS 35/7,5
60 mm
Stripping length
12 mm
Conductor cross section AWG max.
8
Overvoltage category
III
Nominal current IN
5 A
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ECLASS 9.0
27141127
UNSPSC 20.0
39121410
ETIM 7.0
EC000903
UNSPSC 7.0901
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Internal cylindrical gage
A5
ECLASS 10.0.1
27141127
ECLASS 5.1
27141100
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
ECLASS 11.0
27141127
ETIM 3.0
EC000897
Tensile test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section AWG min.
20
Height
60.1 mm
Conductor cross section solid min.
1 mm²
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
8.2 mm
Min. AWG conductor cross section, flexible
20
REACh SVHC
Lead 7439-92-1
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/15
67.5 mm
Connection
1 level
Connection method
Push-in connection
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Potentials
1
Tight fit on carrier
NS 35
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
ETIM 4.0
EC000902
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141127
ETIM 6.0
EC000903
UNSPSC 11
39121410
UNSPSC 6.01
30211811