3035467 Phoenix Contact Terminal Blocks

Product Details

• Tightening torque, min
  0.6 Nm
• Nominal voltage UN
  800 V
• Color
  yellow
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• ECLASS 9.0
  27141120
• ETIM 7.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Tightening torque max
  0.8 Nm
• Conductor cross section solid max.
  6 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• ECLASS 5.1
  27141100
• ETIM 3.0
  EC000897
• UNSPSC 6.01
  30211811
• UNSPSC 13.2
  39121410
• UNSPSC 21.0
  39121410
Maximum load current
36 A (with 6 mm² conductor cross section)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Result of tight fit on support
Test passed
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Number of connections
4
Connection method
Screw connection
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
Number of shocks per direction
3
Length
69.9 mm
Conductor cross section AWG min.
26
Height NS 35/7,5
65 mm
ECLASS 4.0
27141100
Height NS 35/15
72.5 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
ECLASS 6.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ETIM 6.0
EC000897
Conductor cross section flexible min.
0.14 mm²
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 18.0
39121410
2 conductors with same cross section, solid min.
0.14 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Screw thread
M3
UNSPSC 19.0
39121410
Flammability rating according to UL 94
V0
Degree of pollution
3
Connection in acc. with standard
CSA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tractive force setpoint
80 N
Requirements, voltage drop
≤ 3.2 mV
Conductor cross section short circuit testing
4 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Number of levels
2
Insulating material group
I
Rated surge voltage
8 kV
Result of surge voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Width
6.2 mm
End cover width
2.2 mm
Conductor cross section solid min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Nominal cross section
4 mm²
Insulating material
PA
Back of the hand protection
guaranteed
Open side panel
Yes
Finger protection
guaranteed
Tensile test result
Test passed
Conductor cross section tensile test
6 mm²
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Overvoltage category
III
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Setpoint
1 N
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Shock duration
18 ms
Stripping length
9 mm
Nominal current IN
30 A
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG max.
10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A4