3046249 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Area of application
  Railway industry
• Degree of pollution
  3
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 (+/- 2) rpm
• Tensile test result
  Test passed
• Short-time current
  0.3 kA
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/7,5
  73 mm
• Stripping length
  9 mm
• Tightening torque, min
  0.6 Nm
• Nominal cross section
  4 mm²
• Overvoltage category
  III
• Maximum load current
  20 A (with 6 mm² conductor cross section)
• Nominal voltage UN
  500 V
• Surge voltage test setpoint
  7.2 kV
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section AWG min.
26
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm��
Insulating material
PA
Maximum power dissipation for nominal condition
1.02 W
Back of the hand protection
guaranteed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
6 mm²
Tractive force setpoint
80 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Internal cylindrical gage
A4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141126
ETIM 2.0
EC000902
ETIM 4.0
EC000902
UNSPSC 18.0
39121410
Number of levels
1
Color
black/orange
Insulating material group
I
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque max
0.8 Nm
Conductor cross section solid max.
6 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
UNSPSC 13.2
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Nominal current IN
20 A
Result of flexion and pull-out test
Test passed
Bending test turns
135
Requirements, voltage drop
U1 ≤ 6.4 mV; U2 ≤ 1.5 x U1
Proof of thermal characteristics (needle flame) effective duration
30 s
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Length
57.8 mm
Height NS 35/15
80.5 mm
Screw thread
M3
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 3.0
EC000902
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141126
ECLASS 4.0
27141100
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
ETIM 7.0
EC000902