3058350 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  4.06 W
• Nominal voltage UN
  1000 V
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test rotation speed
  10 rpm
• Setpoint
  10 N
• Result of temperature-rise test
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Nominal cross section
  35 mm²
• Insulating material group
  I
• Shock protection test specification
  IEC 60529:2001-02
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tight fit on carrier
  NS 35
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Potentials
  1
• Rated surge voltage
  8 kV
Maximum load current
125 A
Finger protection
guaranteed
Note
Terminal point
Result of flexion and pull-out test
Test passed
Bending test turns
135
Connection method
Screw connection
Tightening torque, min
3.2 Nm
Conductor cross section flexible min.
10 mm²
Conductor cross section AWG max.
2
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
2 conductors with same cross section, stranded max.
10 mm²
Number of connections
2
Color
blue
Degree of pollution
3
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Short-time current
4.2 kA
ASD level
1.857 (m/s2)2/Hz
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Tightening torque max
3.7 Nm
Insulating material
PA
Overvoltage category
III
Nominal current IN
125 A
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
10 mm² / 2 kg
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
35 mm²
Height NS 35/7,5
62 mm
Screw thread
M6
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
8
Max. AWG conductor cross section, flexible
2
2 conductors with same cross section, solid min.
6 mm²
2 conductors with same cross section, solid max.
16 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
16 mm
Stripping length
16 mm
Conductor cross section solid min.
10 mm²
Conductor cross section flexible max.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
54.5 mm
Height NS 35/15
69.5 mm
Conductor cross section solid max.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
2 conductors with same cross section, stranded min.
6 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Min. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
6 mm²
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Result of thermal test
Test passed
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C